vent

Fellow growers. What's happening! I'm almost don't setting my indoor back up, been waiting on some new pieces. I just bought an anemometer to measure cfm and hoping someone in here can point me in the right direction for use. I have my exhaust fans on speed controllers and I want to get them...

I am doing a major remodel to an indoor garden. my plan is to convert a room 26'x14' into two rooms. a flower room (18x14) with 12 1000w DE gavitas a veg room (8x14') with 3 1000w DE I already have a central air con unit ducted to both zones. both rooms would share a wall. I want to make a...

Okay, probably a stupid question. Buuut, if I put a 6 inch fan with a filter on it on a 4 inch PVC pipe about ten ft long, would I be able to get slightly more cfm through it than with the 4 inch fan? I'll have an 11x6x80" room with two 3x3s in it, they will have a 4 inch fan and filter pulling...

I found these cool periscopes that could be painted flat black inside and used to stop light leaks through your intake or exhaust ports. They come in different lengths and you can flip the tubes that slide together so as to orient the ports so they are both on the same side or opposite sides...

For starters this is my first post and my first PERSONAL INDOOR grow. In the past I’ve helped others out and I usually grow outdoor, so I’m just hazy on a few aspects of the indoor growing operation, like ventilation. I heard the build of heat will stun my plant/ not allow it to grow as well as...

years ago when I moved to tents there were few brands and options and they were all overpriced for what they were. I ended up with a couple agro max tents which were among the cheapest at the time. they have somewhat decent zippers and VELCRO VENT COVERS. I can create nice negative pressure...

Looking for suggestions on ventiativen my 15.5x17.5x7.5 grow room that has two doorways and one window. Also I'm trying to do this as inexpensively as I can... Is there an exhaust/intake fan window kit or something along those lines ? My room can get high humidity throughout the day and I've...

Hi, In the process of designing/building a micro grow tent, it will be pvc pipe frame with panda wrap/film - After some advice on how best to create the intake vent(s) through the panda? Im hoping to use some type of micro/insect mesh and prevent light leaks...I thought potentially some type of...

I'm building a grow room in my garage and I need a little advice please... My room is in the garage, and one wall has the laundry room directly on the other side. I was going to put a 4 inch pipe just for air intake, so I would have fresh air coming in from the laundry room. On the top I...

I got a 190 cfm fan by accident and want to return it and get a 440 or better fan. I have an air-cooled 600 w dimmed to 400 w HP's as its to hot with it running 600w and the fan is pretty loud 4" going to 6 " hood to 4" filter it's a venTech combo from Amazon. It says I can exchange until the...

Hello So here's what I've been knocking around in my head. I plan on doing my 4x4 or 5x5 in our huge walk in closet. The walk in used to be a master bath. With it being a master bath I have the water heater in the corner. The heater does keep it muggy and I just in general need to vent air out...

I am using tents in a room. I can ac with an inside ac unit that vent out a window.they're common around here. I can't have one sticking out the window. I want to cool the tents. In the summer I think I can cool the room and blow air in the tents but I'm not sure and in the winter it doesn't...

Question.? When do I open top holes on dome? When do I leave the top off? It has root nubs maybe more don't want to disturb. Cut approx. 1 n 1/2 weeks gsc strain. I remember from b4 it takes 2 - 3 weeks to root ready for trans and I vent the little top holes ?? And at about week 2 n 1/2 or...

Why must one have to ingest actavis or liquor in order to act like a normal person, understand the overwhelming euphemisms that take at least 30 minutes to be cracked each, lots of them never get cracked at all, i never had realized that this person may have been making fun of me the whole time...

hello all, I've been learning from all of you for months now and want to start off by saying thank you. This is my first thread but need some help with a heat issue. I have a 4'x8' Gorila Tent running 1 600w HPS and 1 1000w HPS. To vent the tent I have 1 6" ventech inline fan with filter...

Yo rollers so I put my girlies in flower a week ago and hadn't installed my filter yet, so better start now b4 I need to panic. So I have 2x 6inch inline fans, one for my 4x2 and one for the 4x4. I was pulling air from the light straight out for both of them with the fan sitting directly ontop...