Will this fan work for this cooltube?!

plantz said:
Will this fan http://www.htgsupply.com/viewproduct.asp?productID=46447 cool this cooltube http://www.htgsupply.com/viewproduct.asp?productID=48137

I understand that it is a booster fan but it has 160+ CFM free flow. So will it work?
Click to expand...

And also i noticed alot of people have ducting coming from both sides of their cooltubes... why? Cant u just setup a fan with some ducting connected to the cooltube to suck the heat of the bulb and leave the other side of cooltube open? Why do i need ducting on both sides? This is a pic of what i mean.
 

Attachments

  • Pic_s_CoolTube_Install-08-08-14_1_017.jpg
    Pic_s_CoolTube_Install-08-08-14_1_017.jpg
    51.4 KB · Views: 51
That fan will/might be enough. What size/type lamp? (but I wouldn't use it. Any bends in the duct is gonna kill the effective flow)

The ducting isn't *needed* on both ends, but it does/can help.
You can use colder air to cool the lamp. Using room air, which is a higher temp then outside air, will give less cooling. Radiated heat from the light is unavoidable. IR will pass right through the cool air passing by the bulb (the sun does a good job of getting its heat to the earth's surface)
 
There are two reasons I've noticed people have ducting on both sides. They're either running a loop in and out of the room to make sure the air is cool. Or they're using a carbon scrubber on one side, and exhausting it out of the room on the other.

I have used those same small fans to work with a 400w when I was in a crunch. Obviously you'd be better to get a higher CFM fan, but I'd say you could use this with a 400 and get away with moderate temperatures assuming your conditions arn't atrocious. I was using it in a room with ac on 78 and it kept my canopy around 80-85.
 
oh, you can get those fans at lowes or Home Cheapo too. One on each end in a push-pull should work well enough for a 400 hood/tube with no filter/scrubber.
 
good luck using those fans. Axial fans like the one you linked to have very little ability to push against static pressure. What I mean is it will flow almost nothing once you put more than a few feet of ducting on there. I bought a 4inch to use as an intake fan blows great until you put a duct on it. It blows almost nothing through anything more than 3-4 feet of ducting.
 
ty guys. im gonna go with making my own cooltube and the "stanley blower mod". type it in google if you wanna know more.. its awsome
 
Iam using a 400 watt hps/MH in a cooltube. I will bring outdoor air into my cooltube and vent the exhaust air into my attic.

The wall Iam getting the outdoor air from is about 9 feet away from my cooltube. So how strong of a fan would I need? 170cfm? 250cfm?
 
The 6" might work. I know the 4"" inline sucks ass. those inline fans are made to boost air flow. If you can find a 4" squirrel cage fan. a bit more money, but alot more air. I found a old used bath fan that pushes air very well. the cage type fan just does a beter job then the wing fans.
 
You must log in or register to reply here.

Similar threads

cdgmoney250
Sealed Tent, Living Soil & The Quest For Fire
Replies
19
Views
1K
cdgmoney250
cdgmoney250
Mass Medicinals
Free Grow Equipment (MA/NH - Local only)
Replies
6
Views
1K
Mass Medicinals
Mass Medicinals
chamenon
Difference in fan styles
Replies
10
Views
2K
chamenon
chamenon
10-46
zero grow odor.
Replies
0
Views
571
10-46
10-46
BB Boomer
Drying tent
Replies
2
Views
732
BB Boomer
BB Boomer
Back
Top