Why Is It Hard To Find A Relay Switch?

I want to run my air conditioner on it's own circuit, but still have it controlled by my chhc-4. Where the fuck do I get a simple relay box? I have searched for a couple hours now and I cannot find such a product. This seems like it would be a fairly common piece of equipment, especially in a grow room.

hydro store -Check out C.A.P. they probably make what you need its custom automated products or maybe home depot?

I have checked several online hydro stores and can't find anything.

I would recommend looking for a contactor. Here is one online http://www.auberins.com/index.php?main_page=index&cPath=2
You should also be able to get them at a local lighting supply.

you going to control the relay from the chhc-4 to complete the circuit for you ac.? Why not run it straight from the chhc-4 is it to much voltage/amps for your device?

Yes it is blowing the circuit. 10,000 btu AC, dehumidifier, and a 1/4 horse power pump (which turns on a natural gas water heater for co2 generation). All of this tripping my breaker.

I agree with chennemanm, a contactor is the way to go. We used to use anywhere from .5kw to 10kw contactors where I worked. They aren`t hard to connect at all and can be 1 or 3 phase. If you want a timing assembly you can connect your low power timer to the contactor coil and basicly amplify the power of your timing assembly.