Tora Bora, Pre-98 Bubba Kush, OG Kush, Critical Mass, Super Skunk.

Medi 1

Well-Known Member
ok im back ready to flower here. day 1 was yesterday. the first ones up are the Tora Bora for flowering, then in a few weeks ill be adding some Bubba Kush.
for now its just 2 x 600 hps then when i add more plants ill lighjt up the other 2 x 600 for 4 total. im using the 4x4 tent to veg in with a 120 watt 6700k cfl and 4 x 40 watt flouro tubes. next month ill be adding another digi ballast and bigger light to the tent erea for vegging
still a few final touches i need to do to the rooms to be completly finihsed but im about done now with the major rebuilding.

go ahead n ask questions or comment in this journal. im not doing a disscusion thread.














and whats up in the veng tent.....




 

Medi 1

Well-Known Member
ok quick update from this morning here...bout a week now into bloom. all tora bora here in bigger room. and in tent is og kush, bubba kush, watermellon, critical mass, super skunk and green crak.


IMG_5400.jpgIMG_5405.jpgIMG_5402.jpgIMG_5399.jpgIMG_5406.jpgIMG_5404.jpgIMG_5401.jpg





 

RastaMonsta

Active Member
nice pictures!! looking forward into seeing your yield on the kush strains. how tall are they? like 2 feet? your just letting them grow str8 up?
 

stickybob

Active Member
its looking that way, i've topped mine with rapid response, in fact its the healthiest looking strain i've grown to date
 

Medi 1

Well-Known Member
lonmg run on ducting??..its not long to me. its about 3 foot from hood to fan then out of room. if your talking about the one on the floor thats just for extra even flow as an intake to get the fresh air around the room instead of bringing it in from only 1 side. thats why i added the 4 inch fan to the intake...1 of the intakes. i have another without a fan. i havent needed the extra intake yet. maybe once i fire up the other 2 lights at the end of the month i may need it. its so cool in there right now i actulay have issues with keeping it warm enough, been having to shut the fans down completely for a bit at a time during the lights on. im ruinning heat lights off.

anyways things are doing just fine in here now. this was from yesterday. im about 15 days into flower now and just fed first bloom foods a few days ago. and last night all got hit with water and Root Builder.








and in veg ive taken a bunch of clones form the Bubba and Watermellon. ive also topped the OG and G.C.







 

Medi 1

Well-Known Member
ok well i just mixed up some foods for the veg room.

Groei "A" and "B": 10ml/1gal
Bio-Gold: .6 gram/1 gal

ppm: 730
pH: 6.2
Water Temps: 65
Room Temps: 78
Humidity: 60%











 

Medi 1

Well-Known Member
hey mang..thx. ill get the bl;oom stuff up later, havin fun with a guy calling me a fraud,. thinks im an imposter under this name....lol.
place hasnt changed much over the years....lol
 

Medi 1

Well-Known Member
heres a quicky video of the veg tent yesterday.


[video=vimeo;17273844]http://vimeo.com/17273844[/video]
 

Medi 1

Well-Known Member
ah well...morons cause i asked what a savings was to build his own ballast at 150 bucks when i can buy 1 for 130. then after says it inc a bulb..his name suits him...low educated rednek dum ass. now him n fdd are cryin togetehr over it....lol
 

Medi 1

Well-Known Member
holly fak, been a while since ive updated this.
lots been going on here. today im wriing the room for 220 volt lines with a 30 amp breaker. all lights will be on the 220 line for now then ill need a couple more parts to add a 4 outlet receptacle at 110v for the rest of the equipment. for now ill just use the supplied 110v from the room. i have 6 of those outlets and added a pwer bar to 1 of them to allow me to plug in more stuff. as long as i keep under the 15 amp load for that line.
so ive added a few new environmental controlers so i can now keep the room within 5% and 5 degree from day to night, more automated meters to turn on/off heaters and so on. addeed the de-humidiefer now as well as the humidiefer for full control of the humidity. have an automated sensor to turn on.off the hood fan for cooling the lights. refilled the Co2 tank to.
now im doing the venting for the 2 other 600 i have in the room and add them to the rest of the exhaust line.
ive got another Quantum 250/400/600 digi ballast for the veg tent. ive added the vent line and filter to veg as well today. for now im just going to use the bat wing reflector for the tent and run a 430 hps in it. we dont have any mh i like at work. cheepo sylvania stuff is all we have at the moment and i wont run cheep junk. i want hortilux,....on order. i usualy dont even use mh but its been years so i want to try it again now we have better tech in lighting.

this 220 line was easy to install. i have all electric heat in this place so i never needed the baseboard heater in the room for obvious reasons. so its a 220/30 amp load line. so i removed the heater and installed a 12/2 protected wire as its exposed and must be protected by the aluminum shielding. then ran to a mechanical timer rated fpr 220/40 amp load. then out to 4 reseptacles for the 4 x 600. then ill add 8 more oulets at 110v from same timer box on constant. then i can run some of the other 110v equipment.
almost there with this room.



[URL="http://i51.tinypic.com/207oo5u.jpg"][/URL]
[URL="http://i54.tinypic.com/2w20jef.jpg"][/URL]
[URL="http://i53.tinypic.com/2vaczgk.jpg"][/URL]
[URL="http://i52.tinypic.com/2uym0l3.jpg"][/URL]
[URL="http://i55.tinypic.com/dng6k7.jpg"][/URL]
 

Medi 1

Well-Known Member
ill run a video and go over all the new toys and my woring and how it was done. need to get some water pH`d for tonight for the flower room. a bunch more Watermellon and Bubba Kush have rooted in the tent and went to 1 gal pots. ive also bought a new 48 bed Turbo Cloner for fatser rooting of my cuts.
 

Medi 1

Well-Known Member
ok ive got the 430 hps now running in the veg tent added my new cloenr and a few cuts and moved some of the Bubba to flower now. 30 days into the Tora Bora`s flower time. and the tall one in flower is the watermelon.












 

Medi 1

Well-Known Member
ok so its been a week since adding the bubba and latest round to flower. i was about to give up on the clons, then tonight i looked and i have roots starting. im thinking around another couple weeks of feeds then its water time for harvest.







 

Medi 1

Well-Known Member
ok its that time here....harevst day. great way to start off my new year, dispite the mite attack i made it to harvest and dont look to bad. not as i wanted them but concidering all the struggles i had this run im happy.
lots goin on here today, transplanting for the next addition of flowering plants. ive shut down the cloner as not 1 clone rooted. and i have only a couple left to root from the cheepo clone dome. had roots in that within 6 days. and after about 10 days now nothing from the over priced cloner. so some of thoe rooted ones went into solo cups or Pro-Mix HP today. did some major prunning on the next round to help prevent the pm again. these dam Kush are so easy to get it. you look at them and they throw out pm.













 
Top