Time to get Rollen!

bigstuff777 · Nov 20, 2011

well this morning this is what there looking like.

I nute Burned them did I not?

i flushed them again to with regular water dam tents so freaking full of water Lol
i hope i can fix this

how critical is this ...can they die from this or do you think they will bounce back once or if i can manage to get it right next time?

:wall:

:

some pics of my Retardedness.

hellraizer30 · Nov 20, 2011

That last pic has water on the leaves when the lights are on?
You have to dump those trays in a bucket or something not the
Tent floor! There not looking good at all

stop flushing them
And wait. If temps are good and hum is good light real high up,
All you can do is wait! Il start some new ones just to be safe.

bigstuff777 · Nov 20, 2011

ok yeah i misted them 30 minutes before lights on they were still wet when i went in to take pictures when the light just terned on

yeah i know what a clusterfuck dumping that water on the floor was no bwano

do not know wtf i am going to do to clean it up. maybe soak it up with a towel i guess. but it will be messy

ill try and get the rest out with a bucket

should i stop spraying them all to gather or maybe just after lights off?

hellraizer30 · Nov 20, 2011

Right when lights go out, and leave the water it will go away over time

bigstuff777 · Nov 20, 2011

k then i wont mist 30 mins before lights on then

i managed to get it all cleaned out for the most part

hellraizer30 · Nov 20, 2011

bigstuff777 said:
k then i wont mist 30 mins before lights on then

i managed to get it all cleaned out for the most part

Cool cool.........keep a eye on new growth if it good and green without any issues let me know

bigstuff777 · Nov 21, 2011

well there looking a lil better i guess. some pics

hellraizer30 · Nov 21, 2011

Those look so much better I say couple more days maybee turkey day him then with the flora nova

bigstuff777 · Nov 21, 2011

cool i got to get a humidifier in there. i totally forgot about it before

and a lil wall fan going to have to go get them to marrow.

hellraizer30 · Nov 21, 2011

Its always that way man once you got it all its easyer when nutes and medium is the only thing on the menu lol

bigstuff777 · Nov 22, 2011

On another note. here is my NFT i am building for my tomatoes. and my tomato sprouting witch i am racing to finish this nft so i can transplant them into it.

hellraizer30 · Nov 22, 2011

Looks good so far

bigstuff777 · Nov 29, 2011

well here is what they look like after through them into flower 12 on 12 off it seems to hold temp hearing night hours at like 60 lowest was 56 is this to low or am i fine with these temps?

hit them with 1000 ppm and changed timer ...it seems there burning just a lil but i had a mad fucked event with watering. i had this bright idea to rotate them around to change there light angles and when i did i had to take off my driper rings so when i put them back on i guess i got them upside down and the pump was making them squirt solution all over the fucking place like freaking gizers before i could think to shut down the pump it was already all wet lol well ....this will never happen again cause i will NEVER EVER use a home made drip ring again. so i put some nice drip tips that i got with multi settings ...kinda neat...and the best part Clean and controlled.

I know i know ...you told me to get rid of them fucking things...sigh should have just took your word for it.
anyway here is pics of them 2 days into flower.

bigstuff777 · Nov 29, 2011

oh and i have been hitting them with CO2 a lil bit i did some research and i can generate CO2 with vinegar and baking soda the chemical reaction makes co2....

is this a viable way to supply them with a lil extra co2 needs?

or is there some unclean aspect that i am not aware of?

oh i was wondering too do the flash on a camera f up there cycle?

bigstuff777 · Nov 30, 2011

hay how long do i flood each of the 4 times in flood table?

hellraizer30 · Dec 1, 2011

Flood x4 a day for 30min each flood

bigstuff777 · Dec 2, 2011

any of this bad?

(1) there is some white stuff ...maybe mold? in the coco core
and i had some fruit fly looking bugs in my foliage and down in the top layer of the coco core.

(2) this leaf looks kinda odd not sure if it means anything but thought i would post it.

(3) there is some yellow dots on this leaf is this a deficient?

hellraizer30 · Dec 2, 2011

Looks like salt build up and those tips
Of the leave are a sign of burn whats
Your ppm at?

bigstuff777 · Dec 3, 2011

1000 ppm

what about the fruit fly's are they living on the vinegar and baking soda that i am using to make co2?

hellraizer30 · Dec 3, 2011

No clue, how they looking how long they been in bloom?

Time to get Rollen!

Active Member

Attachments

Rebel From The North

Active Member

Rebel From The North

Active Member

Rebel From The North

Active Member

Attachments

Rebel From The North

Active Member

Rebel From The North

Active Member

Attachments

Rebel From The North

Active Member

Attachments

Active Member

Active Member

Rebel From The North

Active Member

Attachments

Rebel From The North

Active Member

Rebel From The North

Similar threads