Tie your own SCROG net

As kids we used to tie our own nets for catching fish in streams (don't tell Fish&Game!) and for catching small animals. It's a useful skill to have and is pretty easy to do.

Hang a curtain/show rod at head height. Measure and mark your intervals to determine your net spacing. I used 4" here.
1.jpg

Cut an appropriate number of pieces of string. Make them 3X-4X as long as your net needs to be. Tie them to the rod on your spacing marks as shown here.
2.jpg

Starting in the middle of your row, take one line from two neighboring pairs and tie them in a knot. If you're using 4" spacing, tie the lines at approximately 4" down. This is not crucial on the first row of knots, but is important every row after the first.
3.jpg

Always start your knotting in the middle of the row, then alternate moving to the left and right. This will help keep your net straight as you go.
4.jpg

Your arms will start to get tired quickly while making your net. Roll the net up on the rod to keep your work at a handy level. I've found working with my elbows at my side and forearms parallel with the ground to be the least exhausting.
5.jpg

It took less than 3 hours to tie a 6'X 5' net at 4" spacing and cost less than $7 using nylon carpenter's plumb line found at Lowe's.
 

MurphMan

Member
Great fucking idea, ive been trying to find netting thats the right size and had no luck. Plus, learning how to make a net does seem like a good thing to know how to do in general. One thing:
Cut an appropriate number of pieces of string.
Can you clarify this part please?
 
Great fucking idea, ive been trying to find netting thats the right size and had no luck. Plus, learning how to make a net does seem like a good thing to know how to do in general. One thing:

Can you clarify this part please?
Oh, sorry 'bout that! After you determine the width of your net and the size of its openings, measure and mark the rod at those intervals. I used 4" openings, so I measured 4" intervals and marked the rod with a permanent marker. Count the marks on the rod and cut this many strings at 3X-4X the length of your desired net.
 

pilgram

Well-Known Member
i saw your title and called the game warden ASAP ...LOL...i grew up weaving "gill nets" plus rep
 

Luger187

Well-Known Member
damn thats pretty cool. i just used eye screws in a piece of wood and ran string back n forth. theres a link in my sig. it actually turned out really nice, but i have yet to actually use it :wall:
 
damn thats pretty cool. i just used eye screws in a piece of wood and ran string back n forth. theres a link in my sig. it actually turned out really nice, but i have yet to actually use it :wall:
I had initially planned on doing exactly that.

That is a good frame and grid! You'll have an easier time maintaining that as strings accidentally get snipped.
 

Luger187

Well-Known Member
I had planned on doing exactly that but changed my mind when I priced the hardware! :)

That is a good frame and grid! You'll have an easier time maintaining that as strings accidentally get snipped.
yeah it did end up costing a bit =P

but it works... haha
 

marc413

Active Member
Great Idea... I think I am going to use pvc pipe and put elbows for legs. Hopefully it works out!!
 

MISSPHOEBE

Well-Known Member

I just made something that looks like this! To the size of the pots - so each pot - has its own individual screen....... can't wait to try them out!
 
Top