The BubbleHead Gang

purpdaddy

Well-Known Member
ALot of the nutes have Ph satabalizers in them which keeps the ph at what you start with are it might fluctuate a lil but not much..im talkin bout this canna..Im starting to really like this canna with the GH floralicious,,it really helped em out 95%..They were looking so horrible before i started with the supplement i wanted to start over,Glad i didnt.
 

Mongobud

Well-Known Member
Roots are going to grow wherever there's water and nutes to find. I'm not experienced with Bubbleponics, I definitely see the advantage in the early stages before the roots hit the res water but I'm not so sure about keeping the rockwool wet after that. Maybe you should put your water pump on a timer? Hopefully, someone else will chime in...
I took out the manifold tubes and all the other day. The roots are very well in the water. The ones coming up are probably running from the nute soup in the tank. The basically just has base nutes in it now, A little lower than 550. I won't screw with the PH until 6.4.

I should have known something was wrong when it seemed they stopped drinking water and the PPM didn't go down either.

I've been freaking out a little too much I'm sure. Ran out of :leaf:...and it sucked. Mellow now though.
 

purpdaddy

Well-Known Member
Yea after the roots hit the water the tubes actually need to be removed unless you can keep the RW moist and not saturated or you can get stem rot aka. DAMPING OFF.
 

MostlyCrazy

New Member
Hey, Rose! Those bubbles are mezmorizing! Take a toke! Look at the bubble! Take a toke! Look at the bubbles! Take two tokes! Bubbles become bluring! Take three tokes! Where the bubbles go!
 

Paranoid420

Active Member
Hey, Rose! Those bubbles are mezmorizing! Take a toke! Look at the bubble! Take a toke! Look at the bubbles! Take two tokes! Bubbles become bluring! Take three tokes! Where the bubbles go!
Man wish I had some stash!!! Not that far away though! another 3 weeks of flower then the good old 30 day cure!
 

Roseman

Elite Rolling Society
Man wish I had some stash!!! Not that far away though! another 3 weeks of flower then the good old 30 day cure!

IF you trim them right, you'll get enough kief (removed trichomes) from the scissors and your fingers to get you tore up , not counting the oil you can make from the fan leaves.
And I just bet you go ahead and smoke a bud after it drys.
 

MostlyCrazy

New Member
Just smokes a bowl laces with the leaf oil from the Iso hash. A completely different trip. That iso has doggy downer (CBD) effect big time! Smooooth! And pretty much free! $2 of ISO for 6 grams of hash! Life is good!
 

Integra21

Well-Known Member
I have (or had) one tank with 6 beautiful sprouts, two inches tall, 4 to 6 full leaves each, and 2 to 4 roots hitting the top of the water from each sprout. That was yesterday morning at 7:30 A.M.

At 7:30 pm I went in to find one of the feeder tubes disconnected, the rockwool cube DRY, and the sprout had burnt to a crisp, being 4 inches from the 200 watt CFL bulb and a 85 watt bulb. The leaves just froze in time, dry as anything can possibly be dry, and dried to a crisp.
ALL IN 12 HOURS!
I was glad I still had some germinating seed to replace it with.

How in the world does anyone grow sprouts in a plain DWC is beyond me!.
There are 2 simple ways that have worked well for me.

The first is using neoprene discs in your tub and no hydrotron or rockwool. This is how I do my clones. Make the cuttings just long enough to barely touch the top of the water and that you have enough air stones so that there is bubbles directly inder your nets. Just the water from the bursting bubbles is enough to induce rooting and keep the cuttings healthy.

For seedlings or anything in rockwool I simply overfill my dwc tub to the point that the netpot is roughly 1/3 submerged. many people will argue root rot, but as long as you have air directly under the pot, it doesnt seem to happen. I have had several seedlings with soaked rockwool in my dwc that were saturated for weeks to a month and have never had one die from root rot. Try one out with your strain(just 1) and the results may suprise you. I would not reccommend this with a single small airstone on a small pump. Here is a pic of my tub again just so you get an idea of the air I use.
 

purpdaddy

Well-Known Member
There are 2 simple ways that have worked well for me.

The first is using neoprene discs in your tub and no hydrotron or rockwool. This is how I do my clones. Make the cuttings just long enough to barely touch the top of the water and that you have enough air stones so that there is bubbles directly inder your nets. Just the water from the bursting bubbles is enough to induce rooting and keep the cuttings healthy.

For seedlings or anything in rockwool I simply overfill my dwc tub to the point that the netpot is roughly 1/3 submerged. many people will argue root rot, but as long as you have air directly under the pot, it doesnt seem to happen. I have had several seedlings with soaked rockwool in my dwc that were saturated for weeks to a month and have never had one die from root rot. Try one out with your strain(just 1) and the results may suprise you. I would not reccommend this with a single small airstone on a small pump. Here is a pic of my tub again just so you get an idea of the air I use.
Hell yea bro thats a good technique.Do you use a rooting hormone such as clonex?
 

Integra21

Well-Known Member
I use RootTech Rooting gel. It came with a nutrient set I got. Doesnt seem like it does too much since the water in the tub seems to wash it of in a couple of hours. But then its in the water I guess. and both ways have never let me down, but I know I push more air than most people. The pic above, that tub has two General Hydoponics Dual Diaphram air pumps running those stones.
 

purpdaddy

Well-Known Member
What size pumps you using?
I was thinking the samething,anout the gel getting washed off thats why i asked..Maybe a DIP would work better but hell it seems to be working fine,dont adjust anything.
 

Integra21

Well-Known Member
edited above, but if you missed it, I'm using 2 general hydroponics dual diaphram air pumps running those 8 stones. 4 stones per pump. I now have 4 of those pumps: 1 in my cloning tub, 2 for my flower tub, and 1 for my hydro mothers. It also seems that with this much air, res temps dont really seem to mater. My flower tub usually stays between 73F-78F and my veg tub gets above 80F all the time with no negative side effects.
 

purpdaddy

Well-Known Member
edited above, but if you missed it, I'm using 2 general hydroponics dual diaphram air pumps running those 8 stones. 4 stones per pump. I now have 4 of those pumps: 1 in my cloning tub, 2 for my flower tub, and 1 for my hydro mothers. It also seems that with this much air, res temps dont really seem to mater. My flower tub usually stays between 73F-78F and my veg tub gets above 80F all the time with no negative side effects.
Hell no they not supposed to those are good numbers.
Kool man im gonna check into those GH pumps
 

polishfalcon420

Well-Known Member
air is where its at. Im running the ecoplus dual diaframs. in my 14g tote I use two of them running a total of 8 10in stones. when I had the feeder tubes and pump runnig it was hard to get my res temps to stay below 78. once I took the tubes out and shut the pump off they dropped down to 72 within a couple of hours and have stayed there since even in the hot weather. I couldnt believe that the nute pump would run that hot it is a 240gph though.but even with the higher res temps I never had any root issues. hey and why the hell cant I get the bubblehead logo in my sig I have tried a couple of dozen times and it never works.
 

purpdaddy

Well-Known Member
air is where its at. Im running the ecoplus dual diaframs. in my 14g tote I use two of them running a total of 8 10in stones. when I had the feeder tubes and pump runnig it was hard to get my res temps to stay below 78. once I took the tubes out and shut the pump off they dropped down to 72 within a couple of hours and have stayed there since even in the hot weather. I couldnt believe that the nute pump would run that hot it is a 240gph though.but even with the higher res temps I never had any root issues. hey and why the hell cant I get the bubblehead logo in my sig I have tried a couple of dozen times and it never works.
Yea i fgured that the pump would make the water hotter for the simple fact it has moving parts in it which makes friction that causes heat.
 

polishfalcon420

Well-Known Member
hey when you guys count the days thet you have been flowering do you count right from the day you started 12/12 or from the day they started to show flowers?
 
Top