Ok can't seem to get an answer to this question!!? You take PVC, drill holes of some size? support it outside of your PVC fence tubes where the plants will go, drill a hole inbetween each net pot spot, size? but the real question is what tube do you use to go from the feed PVC line to the grow tubes??? How do you secure it in the feed line so it wont leak and then how do you put sprayers and what kind, size, in them inside the grow tubes. I have seen many pictures of the set ups but no close ups of the connections or specifics on items needed to get the connections done. Thanks for your expert advice. IF you wish to direct me to a link please be specific and not just a photo of the set up because like I said have seen the photos, Once again need the details on hole sizes and gromets if you use gromets, size ect ect ect...... Worried about that type of set up leaking. I have feed lines inside but want to change them to top and from outside. I think that is clear. Thanks...
Sprayer lines?
- Thread starter Talisman
- Start date
BigBudBalls
Well-Known Member
You can get the sprayer heads from the hydro shop. The ones at Lowes or HD can work too. Lowes and HD will have the tubbing for the sprayer heads too and the tees and such. Some people will tap threads in the PVC to screw in the heads, others will glue them in or just make a tight fit.
Well those answers are all well and good but not specific enough. I have tapped the pvc and screwed in the nozzels but to run a line to the holes in the feed lines and put them outside seems like they would leak if you don't have some type of grommet. And then the feeder lines out to the sprayers has to be the right size and with so many sprayers and I have them how do I find the perfect fit for the tubes. I don't believe home depot has a lot of hydro equipment. There has to be a DIY on this subject but can't find it... 