Skip the CFL's: The $20 150w complete HPS with ballast and bulb Link

downthedrains said:
mmmm portland metro are hmm? lol
i'm there too. do you go to the grower's meetings at the baghdad or
do you go to OGF's meetings?
Click to expand...

I'm the guy that donated the stack of 250w Halide lights to OGF recently, 14 of them, would have been 28 of them if your guy had shown up just one day earilier... That might give someone a clue who I am.

I don't go to meetings or anything though, one of these days one won't interfere with other things on the weekend.
 
RhymesWithGosh said:
Would there be any chance that someone could post a picture tutorial on how to wire this bastard? I know nothing about wiring. I have the general idea on what I need to do but I want to be 100% correct. Thanks!
Click to expand...

alright i just got done setting these bitches up. I used a computer power cable, it seems to work pretty well. The wires for the computer cable were black, white and green(guessing G for ground). so all you do is strip the wires. twist the corresponding colors together. tape them up and enjoy.:bigjoint:i capped the ends of the wires but thats not really necessary.

edit: sorry for the blurry pics
 

Attachments

  • IMG_5729.JPG
    IMG_5729.JPG
    133.2 KB · Views: 42
  • IMG_5730.JPG
    IMG_5730.JPG
    108.9 KB · Views: 49
  • IMG_5733.JPG
    IMG_5733.JPG
    88.3 KB · Views: 38
  • IMG_5737.JPG
    IMG_5737.JPG
    141.2 KB · Views: 78
i dunno that it really matters, but untill i build some kind of casing for them i didnt want them to roll off and that was my solution..
 
OregonMeds said:
I'm the guy that donated the stack of 250w Halide lights to OGF recently, 14 of them, would have been 28 of them if your guy had shown up just one day earilier... That might give someone a clue who I am.

I don't go to meetings or anything though, one of these days one won't interfere with other things on the weekend.
Click to expand...

Well nice to somewhat meet you :)
I've never gone to any OGF meetings yet. I really should though.
 
I've used this light before with great results, One's only good for about two plants in flowering, and I didnt have the metal cage looking thing on mine.
 
will ravage what up. thanks also, you took of the casing and just hung it like that.... thats what i was going 2 do i think but how much more heat does that output??
 
There is some loss with the vapor tight glass cover on, and you can't directly cool the bulb with a fan if that cover is on.

Those that want the most from this light should probably remove the cover and make your own reflector and just run it open with a fan on the bulb so you can get it even closer to the plants. Not that it's a big difference but every little bit helps when you only have a small light to begin with.

A 150 bulb should be less than 4" from the tops. Further away than that and you waste way too much of the light's intensity.
 
I don't know, I don't have a 150 I have 250's, but I run my 250's 4" away and sometimes let the plats get within 2" before I move it, so surely you guys with 150's could get closer. Set it up in your grow with your fan running and hold you hand under the light and see how close it has to be before you couldn't keep it there all day, when it would be too hot. Or start at 4" and let the plants grow into the light until you finally see a tip get burned. Then just top that tip and you will know how close is too close.

The fan on the bulb is best on the side of the grow so it's blowing the heat away and not towards the plants, and so that it's also blowing the tops pretty good to help cool them, that's how you eek out the closest positioning if you aren't using a cool tube.
 
I put together my 150w econolight setup today and added a few pics in my journal if anyone wants to take a look, journal is in sig. Good growing!
 
I got my econolight yesterday and wiring it was a lot easier than i thought it was going to be. so far, i think it actually puts out less heat then the cfls i had in there. I had 10 26w cfls in my small closet and i had to keep the door open when the lights were on to keep the temperature down. Now i have the 150w hps and 3 26w cfls in there and i can actually keep the door closed without temps getting too warm. Im using the other cfls in my veg chamber that I am currently working on. My closet will be the flower chamber.
 
Glad you are happy with the light, the stuff I've received from econolight all seems to be of decent quality, far higher quality than you'd expect for the price.

A few years ago everyone was paranoid about econolight being a big FBI investigation and that is why you could get such quality lights for a cheap price. They were sucking you in with cheap prices and high quality lights just to get your name on their list.

Funny I haven't read that on here yet since everyone is so paranoid about everything else, hope I didn't start something.
 
You must log in or register to reply here.

Similar threads

GrnMn
How to wire a remote ballast grow light
Replies
5
Views
4K
roseypeach
roseypeach
R
  • Poll Poll
HOW-TO: COOL DIY Remote Ballast 400W HPS 4 < $200.
Replies
3
Views
2K
r3dn3ck
R
Thelowkickk
20 dollar HPS w/ ballast
2
Replies
23
Views
2K
SmokeyMcSmokester
SmokeyMcSmokester
wookieweed
$20 E-conolight 150w HPS back in stock
Replies
4
Views
724
pitbudz87
pitbudz87
scruffmcgruff
very inexpensive grow light $20 bucks hps
Replies
5
Views
3K
Chris602
Chris602
Back
Top