RQS Gorilla glue + Danes Bubblecake 640w led bars

IceBrr

Member
It's funny that you kept that little tiny one. It does speak well of the LED penetration though.
hehe yea time kinda flew and before i knew its roots were one with the others :rolleyes: but i belive it will yield me atleast .3 grams... its something !:clap::P
Penetration is pretty great compared to HPS, but some stems have problems because the spread of the light isnt (or atleast doesnt seem for me) as great as a HPS (notice some of the smaller buds near the top that is what im talking about)

the whole tent got way more dense then i though it would (its only my 2nd time with led, after an 5 years break from growing aswell) im going to try mainline on the next grow, this wasnt a thing back when i grew, alot of great stuff seem to have happend within the 5 years, in the cannabis growing community, with the plants and the techniques growing them, so i have to catch up on alot :hump:

that almost become a roman im sorry, heres a few pics of the gorilla punch, its ready to feast soon
 

Attachments

Snowback

Well-Known Member
hehe yea time kinda flew and before i knew its roots were one with the others :rolleyes: but i belive it will yield me atleast .3 grams... its something !:clap::P
Penetration is pretty great compared to HPS, but some stems have problems because the spread of the light isnt (or atleast doesnt seem for me) as great as a HPS (notice some of the smaller buds near the top that is what im talking about)
There are some growers who are currently working with diffused LED in order to see if they can improve the spread. It also supposedly allows them to keep the LEDs much closer to the canopy in order to offset the lumens drop resulting from the diffusion. Time will tell if it gives any good results.
 

IceBrr

Member
There are some growers who are currently working with diffused LED in order to see if they can improve the spread. It also supposedly allows them to keep the LEDs much closer to the canopy in order to offset the lumens drop resulting from the diffusion. Time will tell if it gives any good results.

see yet another thing i have missed out on :) do you by any chance have a link to a growlog with diffused leds? id like to check it out :weed:
 

Snowback

Well-Known Member
Sorry, I can only remember that it was on Icmag. If you go there and search , it would hopefully show up somewhere. I originally found it by chasing links...
 

IceBrr

Member
Sorry, I can only remember that it was on Icmag. If you go there and search , it would hopefully show up somewhere. I originally found it by chasing links...
Alright dont worry mate i will try to find something :D the gorilla punch had some problems opening so i had to help it with a miniature screwdriver it had some resin from the seed stuck on the leaves so it was stuck but its open now and should grow !

also started binding down the clones for the next grow to focus on mainlineing
 

Attachments

IceBrr

Member
You have a 3-D printer? Jealous.
hehe yeah i do, i printed all the net pots i use this time aswell :P they have some minor design flaws tho but still better then the original pots imo :D

day 40 i took a few leave off and saw like 8% amber coloered trichomes on some of the leaves, so i checked out the plant its only on like 1-2% amber duno why they turned amber this fast, this time tho.. with arround 20-30 days left still.. i did switch light to 12/12 with a decrease of light with 1 hour each day, so it might be a bit futher then the 40 days
 

Attachments

Last edited:

Snowback

Well-Known Member
Printing pots would be one of the exact reasons that I would want one. To make pots that would fill the area of my little cab area perfectly with no wasted space. Ahh maybe one day...
Plants look good!
 

IceBrr

Member
Printing pots would be one of the exact reasons that I would want one. To make pots that would fill the area of my little cab area perfectly with no wasted space. Ahh maybe one day...
Plants look good!
if your going to get one at some point i can highly reccomend trying out 360 fusion before getting it (3d designer program) its free ! it took me almost a month to learn to make a simple net pot :D ofcause you can always download files but, your way better off learning the program from scratch before buying a printer, to see if 3d printing is for you.. It takes a while to learn imo even with youtube guides :D 3d printing also requires quite a bit of maintenance just so you know :) If your going to try it the best tip i can give u to start with is "s" is the shortcut for everything youll just search for what ur looking for with the "s" hotkey, and for pots u will need to use patterns and "line through cone" to make the holes in the pots symmetric.. anyway if u need help feel free to ask

And thanks alot for the comment snowback it seems like it will be one of the better harvests ive had in my time as a grower, maybe even a top 3 :)
 
Last edited:
Greetings!
Can you please write about heigh from plants to lamp?Sorry if i missed this thing)Just cant understand what heigh i need now,i have similar light(600w8bar-strips)...Now 4 week of veg,dimmed to something around 300w and 40inches from plants(recommendation from developer).But after looks you journal,i start thinking that i doing something wrong.It is my "day 2 with led" :lol:
 
Last edited:

IceBrr

Member
Greetings!
Can you please write about heigh from plants to lamp?Sorry if i missed this thing)Just cant understand what heigh i need now,i have similar light(600w8bar-strips)...Now 4 week of veg,dimmed to something around 300w and 40inches from plants(recommendation from developer).But after looks you journal,i start thinking that i doing something wrong.It is my "day 2 with led" :lol:
Hello my friend, at the moment i use a APP for my mobile called light lux meter to determine the height of the plant, i prefer to have them arround 80000 lux while flowering, but the highest plant right now got arround 120000 lux and the other colas a range from 50-95000 lux, you cannot get accurate readings with ur phone if its a iphone afaik and the sensors vary depending on ur phone, if u got a lux meter use that to find the right hight, im still experimenting tho ! its only my 2nd grow with these led lamps

if u wanna know the exact height i add it to next update :)
 
Last edited:

IceBrr

Member
Day 42

lamp distance is arround 18-35 cm away some buds are futher tho but this is the main colas

A + B 30per 10l
Vitalize 1ml per 10l
ultimate pk 25ml per 10l
calmag 13ml pr 10l
aroma boost 1ml per 10l
stimilus 0.5 per 10l
 

Attachments

IceBrr

Member
What material do you use for this? Just want to make you dont use anything dangerous :)
i use PLA witch is virgin bioplast should be pretty safe :D changed hotend to a hardned bi-heated metal one aswell as the nozzle its all top notch quality and doesnt relase any toxic stuff at my print temps.. the printer is pretty mutch fully modded
 
Last edited:
Top