Well you can see two yellow wires connected to one of the heat sinks
Doh, do you think it would be the fans of the driver?
Well did you remove a small driver or two that happens connected to the fans? Follow the wires from them to the driver they're on. If it's wired and fans aren't turning on, the fans need to be replaced. I wouldn't use the cobs without them. They'll get too hot eventually and break.
No, both of the fans are connected to a single 12v driver. It most likely is the fans though. Guess I’ll get new ones and see if that works, thanks guys!
It's very possible it could instead be the driver. If you've got a multimeter, plug it in once you've cut the wire or unconnected the connector and test it to see if the drivers putting out 12v like it should. If not, meabwell has a driver for less than $10 called an APV-12-12. As long as you use .5A PC fans, that will run them both.
Thanks I'll check it out. I contacted the guy I bought it from so hopefully he can send some replacement parts (he didn't mention the broken fans in the description)
Thank you!
