906breeder
Active Member
This is the start of my breeding program. Its probably going to be unorganized on here but I'll do my best. I'm starting with a 10' x 10' room with attached closet that is 2' 6" x 5'. Currently I am finishing up a soil grow so cannot fully convert my space to my needs yet, since I'm waiting on seeds, I'll have plenty of time to get everything squared away.The main room will have a 7' x 7' room built in it. This will be my main flowering chamber. In it I have 4 x 600 watt HPS hortilux bulbs in air cooled Xtrasun hoods ran to C.A.P. 600 watt HPS ballasts on a shelf outside of the 7' x 7' room. 3 Hydrofarm 2'x4' flood tables are set up on a custom built table connected to a 50 gallon reservoir. I use square pots full of hydroton. A 6" centrifugal fan is attached to the ceiling with ducting to a 4" booster fan then the hoods and a medium sized Active Air Carbon filter. The walls and ceiling is lined with I-R block. 2 16" fans circulate the air on the canopy on opposite sides of room. A 4" duct runs from the bottom of the floor to the outside allowing fresh air intake. The pots and tables I am using will allow me roughly 15 plants per table I am estimating. For nutrients I use the FULL LINE of Techniflora Nutes...everything! I believe that covers the flowering room.
Outside of the main room are my water supply where a washer and dryer were, some shelves for the ballasts and a shelving unit for all the "stuff" like pots, nutes and tools. A large board on the wall allows for charts and logs. A ozone generator is also in this area. Cleaning supplies and a garbage is in here as well. Green lights will be installed in ALL ROOMS.
The closet...In here I have a 400 watt Hydrofarm Convertible with a gold MH bulb. Underneath it sits another 2' x 4' flood table and 20 gallon reservoir. I use this for Mothers and plants in the Veg state. Below this flood table is a small shelf with a floro tube above it. A small "Jiffy Tray" with an airstone in it keeps my small clones in netpots and hydroton alive. I use Dip'n'Grow and ROOT 66 for cloning.
I am starting with several strains but will only be flowering one strain per flood table through a perpetual harvest slash sea of green type method.
So far I have these:
BLUE WIDOW from Dinafem
BRAINSTORM from Dutch Passion
ROCKLOCK from DNA Genetics
SOURCREAM from DNA Genetics
SHARKSBREATH from DNA Genetics
also I have a Indica Sativa Hybrid that I've been trying to work with a stabilize for some traits. That I will deal with in a complete seperate thread for breeding and genetics.
Pictures will happen as they are possible and relevant.
Outside of the main room are my water supply where a washer and dryer were, some shelves for the ballasts and a shelving unit for all the "stuff" like pots, nutes and tools. A large board on the wall allows for charts and logs. A ozone generator is also in this area. Cleaning supplies and a garbage is in here as well. Green lights will be installed in ALL ROOMS.
The closet...In here I have a 400 watt Hydrofarm Convertible with a gold MH bulb. Underneath it sits another 2' x 4' flood table and 20 gallon reservoir. I use this for Mothers and plants in the Veg state. Below this flood table is a small shelf with a floro tube above it. A small "Jiffy Tray" with an airstone in it keeps my small clones in netpots and hydroton alive. I use Dip'n'Grow and ROOT 66 for cloning.
I am starting with several strains but will only be flowering one strain per flood table through a perpetual harvest slash sea of green type method.
So far I have these:
BLUE WIDOW from Dinafem
BRAINSTORM from Dutch Passion
ROCKLOCK from DNA Genetics
SOURCREAM from DNA Genetics
SHARKSBREATH from DNA Genetics
also I have a Indica Sativa Hybrid that I've been trying to work with a stabilize for some traits. That I will deal with in a complete seperate thread for breeding and genetics.
Pictures will happen as they are possible and relevant.