Possible CXB3590 Conversion

Any tips on converting this Apollo 180w UFO?
Its draw from the wall is 109 watts.
http://www.apollohorticulture.com/LED-ufo-180w.html
Totally noob but I feel like this would be easy to pull off with some insight from the best!

What kind of driver and heatsink does it have?

I'll have to pull it apart I'll take some pictures when I get home.

Output Voltage range and current are the numbers needed to know if it will run a cxb. The heatsink will need to be enough to handle the heat and will possibly need a pc fan added. You might be better off just building from scratch and selling the ufo if possible.

Before opening it will have 2x drivers somewhere around 55/60 to 85/90v @ 570ma.

You can run 2x 3070/3590 veros etc on each driver. You won't use all the voltage so it will be a little inefficient in that regard but you can use all the parts to run cobs (I know cause I've got the square 140w version using those exact same parts.

Thanks for the nug of knowledge @SydneyLedMan this is purely just to get my feet wet for some potential DIY builds

It was my first attempt at diy. Just use the way they have already wired up the led panel (snip wires for the panel connection) and then put two cobs in series.. Negative from the driver into negative of the cob... Then wire from the positive of the cob to the negative of the next cob and then the positive of the cob to the positive of the driver and it will light up.

You'll also have a transformer to run to fan, just use that same transformer.

Everything will draw power from the computer plug you then connect to the socket.

No need to reinvent the wheel, just look at their logic and replace the panel with cobs. Don't forget the Heatsink.