Photone app for iPhone with diffuser what dli lux ppfd...?

Kenny1234

Well-Known Member
Check I took screenshots of my info on the app my dli my lux and ppfd
Ppfd 731
Lux 39,000
dLi -46
 

Attachments

  • 59C349F3-F0B8-4FB1-A2B1-E4A8B939FE23.png
    59C349F3-F0B8-4FB1-A2B1-E4A8B939FE23.png
    1.1 MB · Views: 17
  • C86E9B37-3697-4FFD-A5CB-E8461658BCAE.png
    C86E9B37-3697-4FFD-A5CB-E8461658BCAE.png
    1.1 MB · Views: 19
  • F4D2CDC6-5A8C-4A7E-92E7-ABB46BB03896.png
    F4D2CDC6-5A8C-4A7E-92E7-ABB46BB03896.png
    1.1 MB · Views: 15
I have used that app.

The only thing that I was concerned about was calibration.

Like the tools I use in my trade have standards were the app you must trust said ppfd from the manufacturer, then set accordingly hopeful your close.

Definitely a useful tool that is priced cheap.

Enjoy and good luck with your grow , from your readings you must be headed into flower.
 
Use the calculator on their site with it:

It bases it's responses of over/under DLI from this chart:

cannabis-dli-cycle.png
 
I have used that app.

The only thing that I was concerned about was calibration.

Like the tools I use in my trade have standards were the app you must trust said ppfd from the manufacturer, then set accordingly hopeful your close.

Definitely a useful tool that is priced cheap.

Enjoy and good luck with your grow , from your readings you must be headed into flower.
Look at them took pics yesterday...wat ya think
 

Attachments

  • 40B6ADC2-6DEF-41ED-ADEC-7233F6BB09A1.jpeg
    40B6ADC2-6DEF-41ED-ADEC-7233F6BB09A1.jpeg
    1.3 MB · Views: 16
  • 83B157A5-5F1E-4DA6-9D7D-BCE2C0968884.jpeg
    83B157A5-5F1E-4DA6-9D7D-BCE2C0968884.jpeg
    988.5 KB · Views: 16
  • 715B9846-0113-4CCB-BB3F-FF830E317C31.jpeg
    715B9846-0113-4CCB-BB3F-FF830E317C31.jpeg
    1.1 MB · Views: 16
  • 2E4BE522-CFAD-43C6-AFC2-DA93E5309F60.jpeg
    2E4BE522-CFAD-43C6-AFC2-DA93E5309F60.jpeg
    1.7 MB · Views: 15
  • 38D72AED-46C7-4DF9-8525-92D3AEC1D23D.jpeg
    38D72AED-46C7-4DF9-8525-92D3AEC1D23D.jpeg
    1.5 MB · Views: 12
  • 10B64072-B417-4CD2-BC23-27EC14D4BE04.jpeg
    10B64072-B417-4CD2-BC23-27EC14D4BE04.jpeg
    1.6 MB · Views: 11
  • DE85EDDD-49A6-4F3E-87CA-C4882DFF11A0.jpeg
    DE85EDDD-49A6-4F3E-87CA-C4882DFF11A0.jpeg
    1.8 MB · Views: 10
  • 2B29C68D-49EA-4461-8401-D49CC9EF4E9B.jpeg
    2B29C68D-49EA-4461-8401-D49CC9EF4E9B.jpeg
    1.5 MB · Views: 9
  • 1D7AAFC5-4D32-46C4-B424-1EB0884ADC5C.jpeg
    1D7AAFC5-4D32-46C4-B424-1EB0884ADC5C.jpeg
    1.5 MB · Views: 8
  • 0C8DE2B9-8CD5-4DDE-A102-AD3C87B6DF12.jpeg
    0C8DE2B9-8CD5-4DDE-A102-AD3C87B6DF12.jpeg
    1.4 MB · Views: 7
I have used that app.

The only thing that I was concerned about was calibration.

Like the tools I use in my trade have standards were the app you must trust said ppfd from the manufacturer, then set accordingly hopeful your close.

Definitely a useful tool that is priced cheap.

Enjoy and good luck with your grow , from your readings you must be headed into flower.
Not really some are veg still there autos Mephisto some I see pistols but is 46 dli to high with 40 thousand lux and 760 ppfd?
 
Look at them took pics yesterday...wat ya think

Imho.

They look a bit exhausted.

I don’t have as much experience in soil as watering at times can make plants droop.

So from these last pics , if they just were not watered I would say.

Could be a bit damp, if not next.

You say 700 ppfd from app, at the canopy

I think that you may very well be close to the number you say.

I would think 500 ppfd would be lots and should lift leaves to make them pray as per say.
 
Imho.

They look a bit exhausted.

I don’t have as much experience in soil as watering at times can make plants droop.

So from these last pics , if they just were not watered I would say.

Could be a bit damp, if not next.

You say 700 ppfd from app, at the canopy

I think that you may very well be close to the number you say.

I would think 500 ppfd would be lots and should lift leaves to make them pray as per say.
So raise light until 500 ppfd?
 
Everyone has there way . My personal preference would be to keep fixture closer then dim for the number during veg.

But some have payed a lot and would like get it all , so they could raise for the amount that works best.
 
Last edited:
So your saying dli should be 55?

No. That's not what I'm saying. The chart is by week. I don't know what week your plants are in. Follow along by the week you're growing in. Also, note that the 'top' numbers are just that. So if you're in week 6 (where the 55DLI is) then you want to be at 45-55. I aim for the lower of the two myself.
 
No. That's not what I'm saying. The chart is by week. I don't know what week your plants are in. Follow along by the week you're growing in. Also, note that the 'top' numbers are just that. So if you're in week 6 (where the 55DLI is) then you want to be at 45-55. I aim for the lower of the two myself.
I'm in about a month ....
 
Read. The. Chart. The weeks are different. Some weeks are lower than some veg weeks some are higher. Part of the DLI difference is the time difference in the schedules (18/6 vs. 12/12).
Here's my paremeters for week for no c02...
 

Attachments

  • 6388BBF1-15EA-489C-8C2B-D70D9B5B2816.png
    6388BBF1-15EA-489C-8C2B-D70D9B5B2816.png
    1.2 MB · Views: 3
  • 1DA6F551-0F73-49E9-AC27-219B27B328B1.png
    1DA6F551-0F73-49E9-AC27-219B27B328B1.png
    1.1 MB · Views: 4
  • E71211F6-B056-427D-8980-2B4225F90F97.png
    E71211F6-B056-427D-8980-2B4225F90F97.png
    1.2 MB · Views: 3
Here's my paremeters for week for no c02...

Cool story. Plug in 'about a month' into the calculator when it asks you which week. Plug in the actual PPFD as well. Plug in your light schedule. The calculator TELLS YOU if you're over or under, then it also gives you suggestions as to how to adjust that with either light levels or time.
 
Use the app and the calculator on the website together. Just like said above it will tell you if you high or low. I use the android version so don't know about the ios version
 
Use the app and the calculator on the website together. Just like said above it will tell you if you high or low. I use the android version so don't know about the ios version

The iOS version is dependent upon the hardware, but I think it's the same with the Android version too. In my case, with an iPhone XS Max, it was within something like 7% or less compared to the Phantom Photobio I had. Though I know a few people on newer iPhone 13's, etc. that didn't have as good luck with accuracy.

If people care, I posted my results here and they're searchable.

But yes. Pretty simple. use the app in combination with the website calculator. The calculator will also tell you if you need to change your lighting, what options you have to adjust.
 
Just checking here, you calibrated the phone to the light chart from your light mfg yes? I mean unless you have an already calibrated meter just putting the phone under the light may not be so accurate. I contacted the developer about using the android version as that one didn't require a piece of paper folded over the lens to use, although it still says its beta. Developer said between the apple and android he believes the apple numbers I was getting but he said barring any other method to calibrate, the best thing to do is use the mfg light map PAR readings and calibrate it to that, assuming the map is legit. Then you can accurately measure your DLI. When I was using it I was reading pretty high compared to what the light map was saying. Now it's calibrated close to spec. And now I don't use it anymore as I know what the current light does for me.
 
Just checking here, you calibrated the phone to the light chart from your light mfg yes? I mean unless you have an already calibrated meter just putting the phone under the light may not be so accurate. I contacted the developer about using the android version as that one didn't require a piece of paper folded over the lens to use, although it still says its beta. Developer said between the apple and android he believes the apple numbers I was getting but he said barring any other method to calibrate, the best thing to do is use the mfg light map PAR readings and calibrate it to that, assuming the map is legit. Then you can accurately measure your DLI. When I was using it I was reading pretty high compared to what the light map was saying. Now it's calibrated close to spec. And now I don't use it anymore as I know what the current light does for me.

I tend to not believe most PAR maps as presented by light makers...it's akin to ad copy and I have serious doubts about the accuracy of pretty much all of them. Best bet if you don't have a meter to check against is to either rent or borrow one if you can. Also, the maps are finicky, and if you're a few inches in one direction or another, you're adjusting to the wrong numbers which is just as bad.
 
Back
Top