Not much experience with clones

Just got these clones off a geezer, looked fine when i got them. Now not so good.

I am using dwc with feeder pipes, ph always at 5.8. Temps are about 26 degrees c, not sure about humidity but spraying all the time (twice, three times a day).

What happened on the first night is they where stood in ph'd water with a little rhizo, they didn't like that. That was 4 days ago and they are not picking up. See if you can see anything else in the picks or if it is all nute burn issue's.

Had success with seed's never tried clones, +rep for help.

It is the first one that concern's me most, look at the top leaf set.

Cheers RIU.

Are they rooted clones or fresh cuttings?

I'm not to sure what you have for a set up but I'd check the water, you may have a rockwool swamp under those clay pellets. but dropping the temp and humidity some wouldn't hurt. not sure if its just the pic but the light looks pretty yellow. how close are your lights and what kind?

stupidclown said:

Are they rooted clones or fresh cuttings?

Click to expand...

rooted, big strong ones coming out the bottom of the cube.

stupidclown said:

I'm not to sure what you have for a set up but I'd check the water, you may have a rockwool swamp under those clay pellets. but dropping the temp and humidity some wouldn't hurt. not sure if its just the pic but the light looks pretty yellow. how close are your lights and what kind?

Click to expand...

nowt wrong with water, light is a 400 watt hps and its about a foot and half way.

I think u might wana try addin some molybdenum to ur nutrient solution.
molybdenum deficentcy

I didn't mean anything was wrong with your water just check to see if there is to much of it.
cant tell from the pic what your conditions are but hot wet plants look like that and its the easiest to check. start with the simple and work your way up

hope it helps