noobie here!???question on the nuits

system:

GH Rainforest
going under a 1000hps
using GH micro/bloom/grow&rapidrooter/3x3 rockwool
been using 1ml per gallon of each for the last week.
16 day old cuttings


Ok,Im getting low on nuts,so Im going to be making a trip to the shop:

a. Some suggestions on what kinds of Nuts I should look into with this particular setup??(what has gave you great results)?
b. If possible a ml/to gallon per week break down on how much I should be feeding the plant.(I know it varies on brand..etc just trying to get a round a bout figure)


PS.-I know its usually a "PPM" thing but I figured this would get me in the ball park considering all the variables.


thank you!
 

justugh

Well-Known Member
depending on the state u are in (some states are knowen to station cops outside of hydro stores.....they take down your plate numbers and then several weeks later they take your trash look tho it for anything bad and if they find something they get a warrent in the middle of the night and come in knocking with guns drawlen)

i personally use amazon since they have return and blah blah blah

try this out ......it is made for soil or hydro ........if using hydro for the first time u might think about stopping unless u have a base in it hydro is unforgiving when it comes to nutrients.............soil has a little buffer zone to mess up .....get a beter understanding of what the strain u picked needs andless of a chance u mess up and get nothing on yeild for your work
 

DeeTee

Well-Known Member
Doesn't matter what nutes you decide on, if hydro ppm's is very important in my book.
 

justugh

Well-Known Member
u will not find one

nutrients mixing and all that ppl on here are not likely to share ............plus what ever they tell u will only be right for their plant/strain................your best bet is to go on one product line and fallow there standard use.......i would think about starting on half str and move up to full to see how it works for the plants
 
u will not find one

nutrients mixing and all that ppl on here are not likely to share ............plus what ever they tell u will only be right for their plant/strain................your best bet is to go on one product line and fallow there standard use.......i would think about starting on half str and move up to full to see how it works for the plants
thanks man,
Very insightful on a few different levels.Sorry for the stupid questions I'm not familiar with a lot of this stuff.
 

DeeTee

Well-Known Member
Where would be a good place on this site to get a PPM-per week breakdown for a normal cycle?(seed/cutting to harvest)

thanks for your reply,And I agree!
Not sure I can answer that, there's no real schedule it all depends on your plant, however I can give you a chart that I use as a starting point, I'm a hydro man but I think it may work for soil, this chart is a starting point, you adjust as needed, your plant will tell you if too high or low, for hydro I use rockwool grow cubes in pots and feed twice a day,....hope this helps.
PPM for Hanna Chart PPM

Seedlings, Early Sprouts ..100 to 250
Early Vegging ......................300 to 400
Full Vegetation ....................450 to 700
Early Blooming ...................750 to 950
Full Mature Blooms ...........1000 to 1600
 
Not sure I can answer that, there's no real schedule it all depends on your plant, however I can give you a chart that I use as a starting point, I'm a hydro man but I think it may work for soil, this chart is a starting point, you adjust as needed, your plant will tell you if too high or low, for hydro I use rockwool grow cubes in pots and feed twice a day,....hope this helps.
PPM for Hanna Chart PPM

Seedlings, Early Sprouts ..100 to 250
Early Vegging ......................300 to 400
Full Vegetation ....................450 to 700
Early Blooming ...................750 to 950
Full Mature Blooms ...........1000 to 1600
Thanks a lot bro!very informative.
 
Top