New Grow tent setup

Riviera123

Active Member
HI all you nice folks , I just got new tent Growlab 80 2.7x2.7
set up was very hard, every step I struggled with getting the tent fabric
over the poles. Only one exhaust hole on top and it was supper tight . So tight and so hard to zip up the material over the poles then the grand finally !
1 inch gap between the center main zipper . i already had the filter up or I would have returned it to
hydro store . Anyways I picked up a zipper at Home Depot called a Wall Zip , I taped i in and seems to be holding so far.
The wall zip has two sided zipper so I worked from inside the tent to tape it into interior . the wal zipper is so smooth and nice.
i have read numerous articles on tent reviews and they all seem to have their quirks .
its a lot of work setting this tent up so beware . It even warmed up in hot weather before and I followed the directions to a tee
 

Attachments

  • 1D66B8E9-4E23-4AF5-8B2E-01E36502236C.jpeg
    1D66B8E9-4E23-4AF5-8B2E-01E36502236C.jpeg
    2.3 MB · Views: 12
  • D3A22329-F15F-4946-8304-3F97F71E755F.jpeg
    D3A22329-F15F-4946-8304-3F97F71E755F.jpeg
    2.1 MB · Views: 11
  • BF6C3970-6502-4D4D-9202-0B46122B2D2B.jpeg
    BF6C3970-6502-4D4D-9202-0B46122B2D2B.jpeg
    1.1 MB · Views: 11
  • A82FFB57-7673-4414-B857-9C3113A89476.jpeg
    A82FFB57-7673-4414-B857-9C3113A89476.jpeg
    2.1 MB · Views: 12
  • 581A7C8D-2F2A-4FC0-BFB1-44103450D9C2.jpeg
    581A7C8D-2F2A-4FC0-BFB1-44103450D9C2.jpeg
    1.9 MB · Views: 12
  • FC5D59BA-B041-489D-A6F8-578550A03E9B.jpeg
    FC5D59BA-B041-489D-A6F8-578550A03E9B.jpeg
    1.9 MB · Views: 11
If your poles are still labeled double check that they are in the right place and make sure corners are fully seated. Sometimes the paint on the tubes won't let them slide in all the way. It shouldn't be hard to assemble the tent. If you force it too much you will end up ripping the tent.
 
Back
Top