Need Help

Hi All, this lady was a part of another post I made but figured would throw it up here...any help to what is going on here? I’ve been PHing in range of 6.0-6.5 in coco for the seedlings w strength of 25-50% general organics go box. She was emerald then started to fade after the first soak I gave. Any advice would be appreciated.

Thanks!

Some helpful advice...

Keep your coco moist all the time...your coco looks dry.
Your pH range should fall within 5.6-6.0, with 5.8 pH being the sweet spot. You'll need to adjust it accordingly.
Always feed the plant....don't use plain water.

Good luck

Thanks @CannaCountry appreciate it

Zurisac said:

Thanks @CannaCountry appreciate it

Click to expand...

10 4, glad I could help

Looks like it needs some N

@Lpena007, thanks! Yes also what a friend said. Gave 100% recommended N nutes at 5.85ph.

100% strength calmag and Nitrogen @ 5.85ph. The yellowing is concerning along w overwatering....the over watering I can leave aside, but the yellowing is more concerning. Any ideas?

Light schedule?

Add some Epsom Salts 1g / gallon

Lpena007 said:

Light schedule?

Click to expand...

18/6 at 28inches

Bosgrower said:

Add some Epsom Salts 1g / gallon

Click to expand...

@Bosgrower will give it a try. Thanks

Defo Epsom salt should help use as foliar spray also

Zurisac said:

18/6 at 28inches

Click to expand...

Sounds good, some idiots have them on 12/12
You’re doing good. If anything, better than me

Lpena007 said:

Sounds good, some idiots have them on 12/12
You’re doing good. If anything, better than me

Click to expand...

@Lpena007 LOL...the verdict is still out if I’m an idiot. Yeah, I’ve been following all steps pretty normally/conservatively...I have a feeling the PH got raised w/o me noticing even though I digitally measure each feeding. Also my first grow w LEDs.

Zurisac said:

@Lpena007 LOL...the verdict is still out if I’m an idiot. Yeah, I’ve been following all steps pretty normally/conservatively...I have a feeling the PH got raised w/o me noticing even though I digitally measure each feeding. Also my first grow w LEDs.

Click to expand...

Personally I don’t like soil because the meters are not accurate.

@Lpena007 yeah I am in coco right now

Zurisac said:

@Lpena007 LOL...the verdict is still out if I’m an idiot. Yeah, I’ve been following all steps pretty normally/conservatively...I have a feeling the PH got raised w/o me noticing even though I digitally measure each feeding. Also my first grow w LEDs.

Click to expand...

What LED do you have (make, model, watts at the wall?). For a high end fixture, 18" over seedlings is too close ... there's no one size fits all lighting rule!

@Bosgrower Hi! I am running the MarsHydro TS1000 @ 30” from seeding w about 40% light strength per the dimmer. I also have 2 Viparspectra450s next to it but not on currently as seems to be overkill...watts at wall don’t know.

I had the Mars lower but seemed to be causing the ladies to fold up like heat stress

No they are not,cheap, outdated components that won't last.They are built by slaves in hostile conditions.Buy from a local [USA] maker and you can't go wrong.