Need Help with Set up on Dwc. I Made Some Questions

Please guys! answer the following questions for me!
the room will be a
7 ft by 4ft height will be 7 ft.

DWC Recommended tote size:

The size of pump for the tote size:

Size of the Baskets for the tote:

Exhaust/intake size: (should both be the same size or one higher than another?)

Size of the dripper nozzle:

recommended PH METER:

Recommended hygrometer:

Thank you guys so much in advanced!!! xD xD

YOu are doing DWC with a drip setting?
You dont really need a drip at all, just hand feed by putting a cup of water in your res and then dump it on your seedling a few times a day. With the bubbles splashing the roots you should have roots drinking water by the 2nd week, your water pump will just add heat to your water which is bad. Keep your water between 62-68 degrees if you want to avoid problems, if not you need to add some beneficial bacteria.

Hygrometers can be bought at Walmart for about 5 bucks , Lowes Home Depot have them too for a few bucks more.

lol yeah, and god dam it! I never thought about the heat build up from my water pump.. my tote is an 18 gal with a i forgot what size pump.. but prob 140 GPH its fuckin small but its submersible (god dam it), I hear the microbes are cheap too (around 10-12 bucks)

How quick do roots grow on a clone mate?

Fuck a drip set up. 18 gal tote, 4 inch net pot: 3 to 5 per tote. Eco 4 pump with 4" disk airstones. Drill a 2 inch hole in the top to fit with a easycloner puck, for keeping your rez full. Make a tube guage on the outside to watch your water levels and u be in bidnezz

chickengutz said:

Fuck a drip set up. 18 gal tote, 4 inch net pot: 3 to 5 per tote. Eco 4 pump with 4" disk airstones. Drill a 2 inch hole in the top to fit with a easycloner puck, for keeping your rez full. Make a tube guage on the outside to watch your water levels and u be in bidnezz

Click to expand...

nice dude! my tote is an 18 gal with these bunk ass 3.75 inch net pots. I have 6 in them. an no air pump yet (figured the drip set up would buy me some time)

Easy cloner puck? Give me more info! xD xD xD I wanna hear about it.

hmmmm tube gauge.. I gotta do that.. how did you make yours?

Also shit happens and I got a bit more clones and found a table for my originally intended ebb n flow.

BUT now I need to find a tray that is at max a 3x6 tray (thats the measurements of the table)

ALSO I dont know what parts I need for the flood drain, and I need longer metal line (fuckin lowes tells me they dont have a rubber line to fit into my water pump...)

Do you guys think I should just go in with my water pump.. and a flood/drain nozzle and tell them I need lines to connect into these? Honestly I never thought of this until I just typed it.. it sounds pretty solid.. I just hate when they ask "Well what are you trying to do?" lmfao

Yes, and if you can't find connection parts in plumbing, also check the area where the have all the sprinkler fittings. Thats wher I get the parts for my water guage.
The easy cloner pucks are the "Easy cloner" 2 inch, black, synthetic, disks that all hydro shops sell for the easy cloner. I think their 50 cents, I use them in my diy lowes bucket cloner too.

I am in my 3 week in a 60 gallon DWC set up that I copyied from brochures I took from the hydro store lol they wated 600.00 for the basic set up I did that and more for about half that. ILL go get the stats and get back to you in a couple hours. Owe by the way Im starting to fall in love with my chamber of life. ha ha.