Circulating fans aren't going to do anything.
I’m using Philzon 1000watt so I’m not sure the exact wattage. But yes I’m using Co2 so the dehumidifier would be the proper requirement thanks for the help!
30w per sq ft is the minimum recommended for flowering with LED's. Ideally you would want at least 960w of LED's in a 4x8. I would recommend adding at least another 600w. Only 300w is going to give poor yields out of a 4x8.
I did take a look at that and it would seem they are in the right range especially with my temps at 83 consistently. I’m running autos so lights is 24 hours so I thought the dehumidifier would come in handy.
Okay I will do that at a later time as I’m already in the midst of this grow already.
If it keeps raining a lot in your area maybe start using a dehumidifier the further along you get. I would keep an eye on that if it keeps rising uncontrollably. Not sure how your plant looks so I can't say whether or not to defoliate but its a growers choice. Some plants I do more than others.
It's not too late to add more lights. 300w is only really adequate for flowering 10 sq ft.
I’ll post a picture once I get back to them.
It’s not in my budget I’ll just put the wall up and just use one side of it.
This is true as well. For my 4x8 tent I have 1080 watts total with LEDs. Right about 33 watts per square foot. I have four 135 watts LEDs per 4x4 side.
All I have is bro science.. defoliate everything 12 inches up from the pot.. it's "Supposed to help lower RH. Maybe research it.. I was trimming the bottom of the plant the entire grown and RH was never a problem.. but then again ur tent is like 3 of mine in one.
Get a 8” exhaust fan and vent outside.