Need help with feeding/ ph, ppm please

SolInvictus88

New Member
This is my day 44 do si do auto
I just was having some issues with the leaves looking very lime green and clawing a little bit as well as some rust, (cal mag) issues, I posted a thread on here and was told it was hungry so I bought the GH FLORA SERIES cal mag +
I was trying to find a consistent feed chart in past threads for feeding autos with GH Flora series with nute amounts as well ass ppm info for nute mix and runoff but wasn't having much luck
So I found a post with someone having similar issues and used the amount of nutes they did
2.5ml/G gro
5ml/G micro
7.5ml/G bloom
4ml/G cal mag
Plain water before nutes was about 6.5 ph and 0 ppm
I don't have a ph pen yet just the strips as posted in pics below
After nutes ph was give or take a minute amount the same, and ppm was at 714
I just watered her 1 gallon
She's in a 3 gallon pot
I tested the runoff and ph was about the same as what i put in and runoff ppm was 197.
I don't know what it should be or what to do next so I'm asking for help
And I will greatly appreciate any given.
This is my first grow and I didn't run into any problems until the last week and a half or so.
It's a budget grow so all you pro high tech growers restrain from criticism please.
I just like growing plants and love weed and just want to smoke my medicine that I GREW. I'm not rich and doing the best I can with what I can afford. Thank you.
Any tips pertaining to anything else would be appreciated as well I've posted pics of my setup below. 1000 watt hps with ventilation
The other girl is my 2 week old blueberry auto
Pic of the do si do is right after I watered her
 

Attachments

hotrodharley

Well-Known Member
Looks pretty good. No shortage of nitrogen. Deep green lower leaves. Keep going. Be sure you have adequate ventilation and without a fan blowing on them.
 

SolInvictus88

New Member
Looks pretty good. No shortage of nitrogen. Deep green lower leaves. Keep going. Be sure you have adequate ventilation and without a fan blowing on them.
Ok, here is what she looks like now, like 12 hours after the feeding,
As for ppm I'm still confused, should I up it? If so to what?
Is there a number to shoot for in runoff?
Is there some sort of equation or something for ppm for instance ( X ppm in feed solution should = ____ ppm in runoff)??
I'm still seeing some clawing on the lower leaves how would I fix that?
 

Attachments

HydroKid239

Well-Known Member
This is my day 44 do si do auto
I just was having some issues with the leaves looking very lime green and clawing a little bit as well as some rust, (cal mag) issues, I posted a thread on here and was told it was hungry so I bought the GH FLORA SERIES cal mag +
I was trying to find a consistent feed chart in past threads for feeding autos with GH Flora series with nute amounts as well ass ppm info for nute mix and runoff but wasn't having much luck
So I found a post with someone having similar issues and used the amount of nutes they did
2.5ml/G gro
5ml/G micro
7.5ml/G bloom
4ml/G cal mag
Plain water before nutes was about 6.5 ph and 0 ppm
I don't have a ph pen yet just the strips as posted in pics below
After nutes ph was give or take a minute amount the same, and ppm was at 714
I just watered her 1 gallon
She's in a 3 gallon pot
I tested the runoff and ph was about the same as what i put in and runoff ppm was 197.
I don't know what it should be or what to do next so I'm asking for help
And I will greatly appreciate any given.
This is my first grow and I didn't run into any problems until the last week and a half or so.
It's a budget grow so all you pro high tech growers restrain from criticism please.
I just like growing plants and love weed and just want to smoke my medicine that I GREW. I'm not rich and doing the best I can with what I can afford. Thank you.
Any tips pertaining to anything else would be appreciated as well I've posted pics of my setup below. 1000 watt hps with ventilation
The other girl is my 2 week old blueberry auto
Pic of the do si do is right after I watered her
In my opinion.. it looks like it's been constantly over watered. Fresh soil should have seen that plant thru til at least now looking healthy. Some autos eat lighter, so the soil lasts a little longer. That's my best guess after checking both threads.
With an auto I would feed 2/3 the dose on the bottles.
 

hotrodharley

Well-Known Member
Ok, here is what she looks like now, like 12 hours after the feeding,
As for ppm I'm still confused, should I up it? If so to what?
Is there a number to shoot for in runoff?
Is there some sort of equation or something for ppm for instance ( X ppm in feed solution should = ____ ppm in runoff)??
I'm still seeing some clawing on the lower leaves how would I fix that?
Like I said it doesn’t look short on anything. I wouldn’t be pushing the nutes. Don’t overwater but when you do use at least 20% of your container volume. If you have a lot of runoff you’re either watering too soon or pouring it in too quickly.
 
Top