Need help with ac infinity 69 pro +. Not controlling my light

So I have the ac infinity 69 pro + , and I’m using 2x UIS RJ11/12 adapters , for my kind x750 . I have tried both configurations , I’ve tried each individual channel on the light “full spectrum “ as well as “red/IR/UV , and nothing .

I just invested heavily into this setup , with all new ac infinity inline fans , humidifier , heater , controller , and co2 controller and regulator on its way as well . I’m about ready to try to trade two of my fluence spydr 2i 650w led ‘s for a ac infinity on frame evo 8 or 10 …

very frustrating . I’ve tried resetting the power as well. Nothing seems to work . Any help would greatly be appreciated

Idk how to delete a thread - but found out that the controller can not dim or brighten kind or fluence lights .. . It can only turn it off or on via a smart plug .
So I’m gonna be in the market for a new light soon . I have to do some research and see which lights can be dimmed with this controller. If hlg/mammoth can’t , I’ll be investing in the evo 8 for my 4x4 or just upgrade to a larger tent and run their evo 10 .

DoubleD5374 said:

Idk how to delete a thread - but found out that the controller can not dim or brighten kind or fluence lights .. . It can only turn it off or on via a smart plug .
So I’m gonna be in the market for a new light soon . I have to do some research and see which lights can be dimmed with this controller. If hlg/mammoth can’t , I’ll be investing in the evo 8 for my 4x4 or just upgrade to a larger tent and run their evo 10 .

Click to expand...

I dim my HLG's using their controller and a Type B connector from AC Infinity:

I just went through this testing on my x420, and saw that KindLed has their own expensive controller.

Do you know if a type B adapter would get the job done? All mine are type A adapters.

Tomatoesonly said:

I just went through this testing on my x420, and saw that KindLed has their own expensive controller.

Do you know if a type B adapter would get the job done? All mine are type A adapters.

Click to expand...

I’ve tried the type A , which plug tight into the light as they’re supposed to but did nothing .

when I searched the ac website , it stated both my high end lights can be controlled by the smart plug .. this means it can only be used to turn on and off , and can not control light intensity .

im gonna sell my fluence spydr 2i’s with the dimmer - and just buy the evo10 . It is overkill for a 4x4 , but I bet I can push some serious serious weight with co2 involved .

I’m about to start a new grow thread in the journal section. So far I swapped to the kindx750 , ac controller pro + controller , ac infinity 6 inch fan with a floraflex carbon filter , ac infinity t3 heater and humidifier , two active air fans circulating inside the tent , as well as the ac infinity co2 controller, with regulator that is stand alone .

I’m also triggering a 4 inch intake fan with an external carbon filter to keep any smells in the lung room out “I lack space so I use my front porch .
The last piece is a 10k btu air conditioner that will be connected via a smart plug as well .

I really wish this kind would dim and brighten with the automated controller - but when I sell my other equipment I’ll purchase the evo10 and be able to completely manipulate intensity , just like a normal day .

right now my light is on a manual timer , 6/2-6/2-6/2 , vpd is 1.1 , temp is 80 degrees with lights on , 72 off and humidity is holding 67%

Seems like any light with an adjustable spectrum will not work, at least that’s my experience.

Triplefastaction said:

Seems like any light with an adjustable spectrum will not work, at least that’s my experience.

Click to expand...

Yeah im starting to see the same thing . Being as it’s two totally seperate channels on the kind with a plug in for each , I assumed I could run two adapters to control both …

I’m gonna sell my two fluence spydr 2i 630’s and dimmer to get the ac infinity evo 10 . I really like the new kind x2 also , with complete spectrum adjustability whites/blues/red.

DoubleD5374 said:

So I have the ac infinity 69 pro + , and I’m using 2x UIS RJ11/12 adapters , for my kind x750 . I have tried both configurations , I’ve tried each individual channel on the light “full spectrum “ as well as “red/IR/UV , and nothing .

I just invested heavily into this setup , with all new ac infinity inline fans , humidifier , heater , controller , and co2 controller and regulator on its way as well . I’m about ready to try to trade two of my fluence spydr 2i 650w led ‘s for a ac infinity on frame evo 8 or 10 …

very frustrating . I’ve tried resetting the power as well. Nothing seems to work . Any help would greatly be appreciated

Click to expand...

I can tell you, best advice youll get on those lights, is calling ac infinity customer service. They have all kinds of adapters, for most any brand of light to work correctly with controller 69. I can tell you your life will be so much better with the Evo. I have an Evo. 4 and it is VERY powerful. So much that I have to back it down as their suggested use is often to much intensity.

1000-1300 umols at this height . I just triggered it off the uis smart plug . No matter what adapters I used it didn’t matter . I’ve ran mars hydro fc8000s , fluence spydr 2i , hlg and now a kind x750 , and none of the forementioned lights come close to putting out the quality the kind does . I’m guessing it’s the UV/IR spectrum aiding in terpene/trichome production , but the flower I’ve grown under this light has all been top top notch.

I’ve heard the evo8 and evo 10 run extremely hot , myself I like the new flora flex lights . They’re the best bang for your buck but the kind puts out massive trichomes so I’m rolling with that for now