Need help! Not sure what’s up

Tomzy17

Well-Known Member
Yo guys
Tonight I got 10 cuttings I have put them in my new rdwc system.
When I got them they are very droopy and not really sure why,
Any guess what’s up with these?
0B514D3F-FCBF-48EC-9D00-95C4E1F51944.jpeg 0FC3D6C5-373A-4D92-A28A-2604ED6E01AC.jpeg 09A5DB8D-BE43-468F-830C-C041CF2C265C.jpeg F6C9AE8C-AF70-4DB4-AC49-C486F582FF1D.jpeg 19CE904D-8B4C-4028-9801-2ED6D4712640.jpeg
 

Tim1987

Well-Known Member
Did you rinse, your clay balls really thoroughly, beforehand?
Double check your ph.
Then double check your ppm. You barely need any, right now.
Go from there.
Let us all know.
Good luck mate.
 

Tomzy17

Well-Known Member
Did you rinse, your clay balls really thoroughly, beforehand?
Double check your ph.
Then double check your ppm.
Go from there.
Let us all know.
Good luck mate.
Yeah everything of my set up is bang on, they were already droopy when I picked them up off of a friend he weren’t sure what was wrong with them the newer growth that’s drooping looks like a slightly lighter colour like it’s starting to yellow a bit I was thinking maybe he hasn’t fed them anything so I hand watered them when I put them in with the water in the system which has nutes mixed in (hand watering till roots grow through the pots) and keeping an eye
 

Tim1987

Well-Known Member
Ok.
Just watch your ph. Keep it over 5.5, and under 6.5, for your hydro.
You have PLEANTY of oxygen going??? Not violently bubbling. But a lot?
 

Tomzy17

Well-Known Member
Ok.
Just watch your ph. Keep it over 5.5, and under 6.5, for your hydro.
You have PLEANTY of oxygen going??? Not violently bubbling. But a lot?
PH is stable at 5.9
And I have 2 air stones in every pot.
It’s definitely the way he’s looked after them just not sure what’s up with them?
 

Tim1987

Well-Known Member
Have you tried lowering your nutrients?
How many mls per litre, are you feeding?
Do you know your ppm?
Do you know your ppm out the tap?
 

Tomzy17

Well-Known Member
Have you tried lowering your nutrients?
How many mls per litre, are you feeding?
Do you know your ppm?
Do you know your ppm out the tap?
I got the clones from a friends house tonight I don’t know how he’s treated/watered ect.
I put them in my set up tonight which is bang on
5.9 ph
Water temp 63.2
Room temp 81.2
Humidity 40%
Ppm 500-600
I have literally just put them in there ain’t anything to with my set up it’s something that he’s done to them/treated them was wondering if anyone would know by looking at them if they could sort of guess what’s up with them.
 

Roger A. Shrubber

Well-Known Member
don't overwater the rockwool, it retains a lot of moisture. you may want to carefully "fling" a little of the water out of it if its waterlogged. keep it just damp and just above the bubbles in your res, the roots will stretch for the bubbles.
 

Tomzy17

Well-Known Member
don't overwater the rockwool, it retains a lot of moisture. you may want to carefully "fling" a little of the water out of it if its waterlogged. keep it just damp and just above the bubbles in your res, the roots will stretch for the bubbles.
The rockwall is pretty much just damp and they are about an inch above the bottom of the net pots is that fine or should they be on the bottom of the net pots?
 

Tomzy17

Well-Known Member
Cool.

Are those roots long enough to reach into the res?
Do you need to top water for a bit to keep them going until they reach the water level?
They’re not quite long enough I’ve got them about an inch above the bottom of the net pot, would you say this is to high? And I’m having to top water for time being hopefully not to long as I’ve got voodoo juice In my mix so hopefully should get a rapid bit of root growth
 
Top