My new RDWC double grow

MoCk_My_SoCk

Well-Known Member
I put together this RDWC system with 2 - 5gal. grow buckets and 1 - 5 gal. res. I use a 7 stage system for RO water. Since I liked the Super Skunk so much from the last grow that I thought I'd grow another (plant on the left). The other plant (plant on the right) is Jock Horror. I grew this a few years ago and want to use up all my feminized seeds before I go on to other strains again.
Right now I have 2 300watt & 1 600watt led lights. When I kick it to flowering I'll add the other 600 watt led.
I'm using the General Hydroponics Flora Series (minus the grow solution). I use the Bloom, Micro & CaliMagic. Right now I have it at 510ppm & always 5.8pH.
They are on day 48 of veg now. Since I've grown these 2 strains before, I wanted to experiment a little. I've been doing very heavy fan leaf trimming. The plants were so thick that even with all the air circulation in the tent, they build up moisture all over the packed leaves. They kept popping right back into too bushy territory within days, so I kept trimming. I have now stopped trimming as of a couple days ago. I'll do it once more before I kick it into flower. Since there seems to be a never ending argument over whether to trim or not to trim, I thought I'd try it myself.
Anyway, here are the girls.
 

Attachments

  • 9-5-19 - Day 48 Both.jpg
    9-5-19 - Day 48 Both.jpg
    3.3 MB · Views: 47
  • 9-5-19 - Day 48 Both side.jpg
    9-5-19 - Day 48 Both side.jpg
    2.8 MB · Views: 44
A bit of an update. 2 days ago I gave them both a full trim and tonight they go 12/12. They're @ 746ppm & 5.8pH now. The crappy ppm meter I had crapped out on me and I had to use a cheap backup one. I want to get new lights for my next grow because I'm sick of the purple.
 

Attachments

  • 9-10-19 - Day 53 before trim Both side.jpg
    9-10-19 - Day 53 before trim Both side.jpg
    3.7 MB · Views: 18
  • 9-10-19 - Day 53 before trim Both.jpg
    9-10-19 - Day 53 before trim Both.jpg
    3.4 MB · Views: 19
  • 9-10-19 - Day 53 After full trim Side.jpg
    9-10-19 - Day 53 After full trim Side.jpg
    2.8 MB · Views: 17
  • 9-10-19 - Day 53 After full trim Top.jpg
    9-10-19 - Day 53 After full trim Top.jpg
    2.7 MB · Views: 18
  • 9-12-19 - Day 55 side.jpg
    9-12-19 - Day 55 side.jpg
    3.2 MB · Views: 15
  • 9-12-19 - Day 55 top.jpg
    9-12-19 - Day 55 top.jpg
    3 MB · Views: 15
Here's another quick update. I'm now day 6 into 12/12 and I've been upping my nutes. I'm up to 1010ppm & the res still stays at 5.8pH. I've used almost no pH down this grow. These 2 have bushed back out and I've raised the lights a little. So far everything seems like it's going great. I'll have to wake up early one day for the non purple pics.
 

Attachments

  • 9-18-19 - Day 6 Flower side.jpg
    9-18-19 - Day 6 Flower side.jpg
    5.7 MB · Views: 7
  • 9-18-19 - Day 6 Flower top.jpg
    9-18-19 - Day 6 Flower top.jpg
    3.8 MB · Views: 6
It's been a little while, so I thought I'd throw in a couple more pics. It's day 20 of 12/12 and the grow is still doing good. I had to keep trimming as they got bigger, but I didn't go super overboard. I'm pretty sure that I'm done trimming for the rest of the grow. I got the nutes just over 1300ppm but it's just a little too much for the Jock Horror. I'm going to dial it back a bit. I'm also having some humidity problems. The carbon filter helps, but I need a dehumidifier. Does anyone know of a quality yet affordable small dehumidifier that I can just slide in the corner of the tent? The reviews on all of the small ones I find say they don't really work that well. I'll also need a bigger res and a water chiller for my next grow. My water temps are ~ 74F during lights on.
Well, I'm off for a puff. I'm down to my last bud from my last grow.
 

Attachments

  • 10-2-19 - Day 20 Flower side.jpg
    10-2-19 - Day 20 Flower side.jpg
    3.7 MB · Views: 8
  • 10-2-19 - Day 20 Flower closer.jpg
    10-2-19 - Day 20 Flower closer.jpg
    2.9 MB · Views: 9
I run air from my forced air furnace as return air, its dry.
edit,into my lung/mech room,flower room draws air from there.
 
I decided to just try my luck with a small dehumidifier and see if it helps.
I've been thinking about adding Armor Si to my res, but there's a lot of differing opinions on that product. Unfortunately, it's more expensive than any of my other nutes. Hell, I only paid around $28+ tax for a gallon of GH Bloom, but they charge around $25 for a quart of Armor Si.
You know, it's weird. The Super Skunk is supposed to be an Indica dominant while the Jock Horror is Sativa dominant, yet the Super Skunk is growing taller than the Jock Horror and still doesn't seem quite done with it's stretch. When the Super Skunk was only about a few weeks into veg, she had HUGE fatass leaves. As she grew, all the new leaves grew in skinnier and look about the same as the other plant.
 
I found a cool little deformed leaf near the bottom of my Jock Horror plant. I've never seen this in any of my plants before. Kinda cool.
 

Attachments

  • 20191010_070937.jpg
    20191010_070937.jpg
    1.9 MB · Views: 8
Here's a closer pic of the Jock horror and Super Skunk at day 29 of 12/12..
 

Attachments

  • 10-11-19 JH close.jpg
    10-11-19 JH close.jpg
    3 MB · Views: 9
  • 10-11-19 SS side.jpg
    10-11-19 SS side.jpg
    3.9 MB · Views: 8
It's far too difficult to get in the tent to trim. Next time, I'll just shwazz it before I kick it into flower.
EDIT: I haven't added nutes in 5 days. I've just added RO water. They drink soooooooo much and eat sooooo little now.
Oh ya, the dehumidifier is pulling a lot of water out of the air and now that it's been snowing out here, I've opened a window near the tent. The Temp is now around 74 and the humidity is around 53%.
 
Last edited:
Here's day 41 of 12/12. I had a bit of a nutrient burn problem. Everything seems ok now, though. Well, except for my damn Super Skunk. A few big branches in the back are heavy leaning...and I mean heavy leaning. I can't fit my skinny ass back there to tie them up, so they have to sag. I should have set up my scrog screen before I switched to 12/12 to help hold them up and prevent this. I won't make that mistake again.
 

Attachments

  • 10-23-19 - Day 41.jpg
    10-23-19 - Day 41.jpg
    3.4 MB · Views: 6
I forgot to add that half of the lights on one of my 300 watt lamps died. It lasted longer than I thought, so I'm ok with it. Here are a couple close ups of my SS plant. It's more crystally than the JH plant. Sorry again for the purple. My next lights won't be purple.
 

Attachments

  • 10-23-19 - Day 41 close up.jpg
    10-23-19 - Day 41 close up.jpg
    1.5 MB · Views: 12
  • 10-23-19 - Day 41 close up 2.jpg
    10-23-19 - Day 41 close up 2.jpg
    1.2 MB · Views: 11
Last edited:
Back
Top