bubbiewubbie
Member
Hey guys its my first grow and one of my first posts. Ive been a social smoker for a while and now im convinced i dont need pain meds that cause adverse reactions. So after numerous hours of research, buying books, visiting local hydro stores, etc. ive ended up with the following equipment and setup. Mind you this is my first grow indoor. ive done a few stealth out doors with excellent luck. not to mention my garden outside is better than everyone's on the block. Grow room not at same location.
18 site flow-n-grow system with Oceanus 1 titan controller
General Hydroponics 3 part system for nutes
1 king cobra sun leaves 6 inch cooled vent 1000w hps/mh switchable ballasts (these suckers are huge)
1 sun leaves arctic sun?? 6 inch cooled vent 1000w hps/mh switchable ballasts (this one is more deeper and smaller footprint)
.5 - 1.5 Sun leaves grow medium rocks
10x10x8 constructed with 2x4s and braced up well and lined with panda film (black/white) poly.
6 inch 450ish cfm inline fan attached to a 6 inch growbright pure flow tall boy carbon filter.
2 240 cfm inline boosters to help cool the vents
6 inch 450ish cfm inline fan (unknown use yet hopefully someone can chime in on something im forgetting)
Co2 is supplied with those little new breathe co2 producting mushroom bags (first grow, 20$ figured why not)
flower bulb - hortilux eye super hps (120$ ea.....)
and opti something mh for veg. both 1000w
i have 5 og kush from royal queen, 5 white widow from royal queen, 5 critical from royal queen, 1 Dinafem blue thai, 1 sweet cream mandrine auto, 1 nirvana master kush.
germination i just used the bottom propagation/seed starter and put them in bags with wet paper towels and put the humidity dome overtop. So far most have tiny white tails starting to show but its been about room temp so i think they could use a heating apparatus somehow (noted for next grow). Im going to the rubber feeling plugs made with peat moss, i cant right remember the name of the brand. but starting with tweezers and labeling them and poping them under 4 120v 6500k cfl lights. 1500 lumes each light. once they become rooted and nice little sides showing im going straight to the ebb and flow setup which i will have all the ph and half strength nutes already running. Im also planning on running 4 week veg and then flower. i know the times of the strains i have here at a little off from finishing but with proper attention i can identify when to harvest. Im wanting to go about 75% label strength and feed them 4 times a day while lights on 18hrs and once flower will likely increase feeding but at smaller levels of intervals of nutes. So far this is what i got any tips or criticizations bring em on. im just really wanting to supply a few people who have crones, arthritus, sleep disorder, and a few other ailments.
Im open to changing schedules or changing bulbs etc but this is what i have for my 1st grow. I know its growers experience that you just pick up what works for you but anything else you feel that has worked for you feel free to add. I figured its time i joined the community and started contributing
DoGoo
18 site flow-n-grow system with Oceanus 1 titan controller
General Hydroponics 3 part system for nutes
1 king cobra sun leaves 6 inch cooled vent 1000w hps/mh switchable ballasts (these suckers are huge)
1 sun leaves arctic sun?? 6 inch cooled vent 1000w hps/mh switchable ballasts (this one is more deeper and smaller footprint)
.5 - 1.5 Sun leaves grow medium rocks
10x10x8 constructed with 2x4s and braced up well and lined with panda film (black/white) poly.
6 inch 450ish cfm inline fan attached to a 6 inch growbright pure flow tall boy carbon filter.
2 240 cfm inline boosters to help cool the vents
6 inch 450ish cfm inline fan (unknown use yet hopefully someone can chime in on something im forgetting)
Co2 is supplied with those little new breathe co2 producting mushroom bags (first grow, 20$ figured why not)
flower bulb - hortilux eye super hps (120$ ea.....)
and opti something mh for veg. both 1000w
i have 5 og kush from royal queen, 5 white widow from royal queen, 5 critical from royal queen, 1 Dinafem blue thai, 1 sweet cream mandrine auto, 1 nirvana master kush.
germination i just used the bottom propagation/seed starter and put them in bags with wet paper towels and put the humidity dome overtop. So far most have tiny white tails starting to show but its been about room temp so i think they could use a heating apparatus somehow (noted for next grow). Im going to the rubber feeling plugs made with peat moss, i cant right remember the name of the brand. but starting with tweezers and labeling them and poping them under 4 120v 6500k cfl lights. 1500 lumes each light. once they become rooted and nice little sides showing im going straight to the ebb and flow setup which i will have all the ph and half strength nutes already running. Im also planning on running 4 week veg and then flower. i know the times of the strains i have here at a little off from finishing but with proper attention i can identify when to harvest. Im wanting to go about 75% label strength and feed them 4 times a day while lights on 18hrs and once flower will likely increase feeding but at smaller levels of intervals of nutes. So far this is what i got any tips or criticizations bring em on. im just really wanting to supply a few people who have crones, arthritus, sleep disorder, and a few other ailments.
Im open to changing schedules or changing bulbs etc but this is what i have for my 1st grow. I know its growers experience that you just pick up what works for you but anything else you feel that has worked for you feel free to add. I figured its time i joined the community and started contributing
DoGoo
