LST DWC 5 gallon buckets?

ntg908

Well-Known Member
Anyone got any sort of system for LST on 5 gallon bucket 6" basket lids? Ive thought of drilling holes on the thin lip and getting some wire loops through them all around the lid to tie off too, but am scared of light leaks into the res, its a very thin lip. I lift the basket lid off every week for a nute change so its hard to build a frame or tie off to something thats not on the lid. And i dont trust tape as much as i do for holding air lines
 

Attachments

  • PXL_20210522_000626004.jpg
    PXL_20210522_000626004.jpg
    1.5 MB · Views: 6
  • PXL_20210522_000633738.jpg
    PXL_20210522_000633738.jpg
    1.3 MB · Views: 6
I just picked up some of these clips from Andrea ,they are fantastic manipulators with tow loop.

Google, premium low stress plant training clips.
 
I was suppose to be 8 , but her feminized sister was a mister so now she will be by herself so I am going to do 16 . So fingers crossed I can turn in a month but I have a lot of room to fill.
It’s been a very long time and I am a bit rusty , but with all the info here I will get it dialed in. Did not help breaking her arm prior to obtaining these clips.
 
Get a roll of 16-18 Guage wire and bend like so. You can tape to lid do you can still remove the lid or go down to big lip but then have to take off to remove lid
 

Attachments

  • 16217408758236827979165900579724.jpg
    16217408758236827979165900579724.jpg
    1.3 MB · Views: 11
  • 16217410244551905661994262900438.jpg
    16217410244551905661994262900438.jpg
    1.2 MB · Views: 11
Back
Top