Low Frequency Induction Lamps

I heard they were better than HPSs - no heat, 100lumens/watt, red and blue light. Can someone tell me if this is true or not? I couldn't find much info on them.

Is that the same as a plasma lamp?

Source: Wikipedia
Magnetic Induction Lamps (AKA Induction Lamps, Fluorescent induction lamps)


Aside from the method of coupling energy into the mercury vapour, these lamps are very similar to conventional fluorescent lamps. Mercury vapour in the discharge vessel is electrically excited to produce short-wave ultraviolet light, which then excites the phosphors to produce visible light. While still relatively unknown to the public, these lamps have been available since 1990. The first type introduced had the shape of an incandescent light bulb. Unlike an incandescent lamp or conventional fluorescent lamps, there is no electrical connection going inside the glass bulb; the energy is transferred through the glass envelope solely by electromagnetic induction.
There are two main types of Magnetic Induction Lamps, External Inductor Lamps and Internal Inductor lamps. The original, and still widely used form of induction lamps are the internal inductor types. A more recent development is the external inductor types which have a wider range of applications and which are available in round, rectangular and "olive" shaped form factors.
External inductor lamps are basically fluorescent lamps with electromagnets wrapped around a part of the tube. In the external inductor lamps, high frequency energy, from the electronic ballast, is sent through wires, which are wrapped in a coil around a ferrite inductor on the outside of the glass tube, creating a powerful electromagnetamalgam (a solid form of mercury). The excited mercury atoms emit UV light and, just as in a fluorescent tube, the UV light is down-converted to visible light by the phosphor coating on the inside of the tube. The glass walls of the lamp prevent the emission of the UV light as ordinary glass blocks UV radiation at the 253.7 nm and 185 nm range.
In the internal inductor form (see diagram), a glass tube (B) protrudes bulb-wards from the bottom of the discharge vessel (A), forming a re-entrant cavity. This tube contains an antenna called a power coupler, which consists of a coil wound over a tubular ferrite core. The coil and ferrite forms the inductor which couples the energy into the lamp interior
The antenna coils receive electric power from the electronic ballast (C) that generates a high frequency. The exact frequency varies with lamp design, but popular examples include 13.6 MHz, 2.65 MHz and 250 kHz. A special resonant circuit in the ballast produces an initial high voltage on the coil to start a gas discharge; thereafter the voltage is reduced to normal running level.
The system can be seen as a type of transformer, with the power coupler (inductor) forming the primary coil and the gas discharge arc in the bulb forming the one-turnload of the transformer. The ballast is connected to mains electricity, and is generally designed to operate on voltages between 100 and 277 VAC at a frequency of 50 or 60 Hz. Many ballasts are available in low voltage models so can also be connected to DC voltage sources like batteries for emergency lighting purposes of for use with renewable energy (solar & wind) powered systems.
In other conventional gas discharge lamps, the electrodes are the part with the shortest life, limiting the lamp lifespan severely. Since an induction lamp has no electrodes, it can have a very long service life. For induction lamp systems with a separate ballast, the service life can be as long as 100,000 hours, which is 11.4 years continuous operation, or 22.8 years used at night or day only, or 45.6 years used at half of a night or day only, or 91.2 years for one quarter of a night or day only. For induction lamps with integrated ballast, the lifespan is in the 15,000 to 50,000 hours range. Extremely high-quality electronic circuits are needed for the ballast to attain such a long service life. Such lamps are typically used in commercial or industrial applications. Typically operations and maintenance costs are significantly lower with induction lighting systems due to their industry average 100,000 hour life cycle and five to ten year warranty.


I am just asking if this lamps are better to grow under than HPSs. If someone has experience with them, please comment!

I use two 400 induction instead of the 2 1000 watt hps I'd been using and the yields have been no different. So yes the induction is better

2-400W in my 4'x4'x7.5' tent will heat up to about 94 degrees without major ventilation so they aren't entirely "heat free" but you'll notice that you can put your hand on the bulb on the bottom but the driver on top is too hot to hold your hand on for long periods of time. with the tent open in a couple places and a blower fan I never go above 80 degrees in my spare room without running AC.

I was at the head shop looking at lights & they really were pushing the induction lights. They only had one there but they were talking it up like God himself made it. No heat, lots light etc. Very expensive though. 1000 watt equiv (I think) was around $575.00.

Fuck I wish other lights weren't so expensive I would be happy to give em a try.