Looking for tips

Hey everyone I am new to blasting with butane and I could use some pointers, I had done 11 runs total and only 1 full nug run. I have been trying to get the Swiss chesse look but have yet to accomplish it I will post a picture of my equipment, my 10th purge and what I want to makes. And and all tips welcome and let's make this an informative thread please ~good vibes only~
My tenth run, 6 time with vacuum my vac chamber, Otha's a digital heating pardon it and it's sittin in a larger spot to creat better even heat
These to last picture are what I would like to creat

That looks pretty darn good to me, man. I wish I knew more to help you. I tried to do a run with Novak chamber and I'm still in the process of when arising. I figured with my needs and budget it just wasn't for me so I decided to stick to Rozen for us and him probably going to start making bubble hash wish I knew more to help you. I tried to do a run with No vac chamber and I'm still in the process of winterizing . I figured with my needs and budget it just wasn't for me so I decided to stick to Rozen press and I'm probably going to start making bubble hash. But from what I've seen on YouTube videos and my research online what you have there looks pretty spot on well purged nice Amber Color nice and translucent. Not sure what exactly achieves the honey comb look i'm pretty sure that just comes from the vacuum purging it and is probably strain dependent and also as to where the butane set in the actual product most the stuff when it's packaged and sold is all pressed together and not honeycomb like that I don't think. Wish I could be more helpful hopefully this thread gets going

Just vac more and don't agitate at all. I've read that somewhere too. Like pour into your dish for Vaccing instead of scraping and agitate and heat as little as possible. Maybe the pics you are seeing are from nicer more expensive vac ovens that can pull a stronger vacuum. I'm curious how much did you spend on that vac and pump?

All together I spent around 350 and it's just a cheap chamber with a heating pad, I was thinking I may need a vac oven to achieve that look cause it can spread more but I figured it can't hurt to ask

just take smaller pieces of it so it can spread out more. purge smaller amounts at a time.

I've done runs from 3 grams up to 26 still can't get it

All nug runs? I gave up on BHO. I'm putting my resources into building my rosin press and cranking up a grow. It's been awhile but I don't think I've forgotten everything. Another thing I would try though if your still into blasting is to use a tube that your material Will fit tightly into. I ground all of mine out and on the first run iPad to lightly and all of it blue forward towards the screen causing impurities and that green color to get in too. My last run, by about the time it was too late I finally figured it out I packed coffee filter to make up for the space between the open hole and the patch material, and also use coffee filter on the tapered and to force the butane to slow down and trickle my last run, by about the time it was too late I finally figured it out I packed coffee filter to make up for the space between the open hole and the path material, and also use coffee filter on the tapered and to force the butane to slow down and trickle. I would use steel wool next time if I ever did it again for the tapered and that you spray into I figured out sort of by trial and error that using 150 µm screen wasn't enough two 50 micron screens wasn't enough and by adding more coffee filters you're just making it more pure add by keeping everything tight you're forcing the butane to trickle passed all of the surface area in your extraction tube. You may need to do more runs and use more cans or that may allow you to get down to the one can per ounce of standard that I read about.

Best of luck and be safe. Are lots of great YouTube videos but I'm sure you watch them all