lighting question

wexpac

wexpac

Active Member
Hi I am new to indoor growing and had a few questions... I have a room setup about 6 long x 3 ft wide x 8 ft tall and I have 5 plants in there. I use a 400 wat MH and a 150 watt HPS i had sitting around. Now my question is am I able to add a couple more plants without effecting my over-all yield per plant? I am assuming the more plants I add the smaller the yield but will 1-2 extra really effect the others? four clones of blue dream and 1 querkle i have directly under the 150 watt hps.. I am planning on lining the walls with mylar asap
 
wexpac said:
Hi I am new to indoor growing and had a few questions... I have a room setup about 6 long x 3 ft wide x 8 ft tall and I have 5 plants in there. I use a 400 wat MH and a 150 watt HPS i had sitting around. Now my question is am I able to add a couple more plants without effecting my over-all yield per plant? I am assuming the more plants I add the smaller the yield but will 1-2 extra really effect the others? four clones of blue dream and 1 querkle i have directly under the 150 watt hps.. I am planning on lining the walls with mylar asap
Click to expand...
Any pics? 150 sounds small, with or without the 1 or 2 extra plants. To help with light penetration, maybe you can add 2' Fluorescent tubes or some cfl's on the sides to give your plants some added light without pulling too much power?
 
im sticking with the 5 plants then.. will the plants be effected negitivly for using a 400 mh and also a 150 hps at the same time side by side? all four plants are directly under the 400 watt with the one querkle half under the mh and half under the 150 (that justs how they fit).. I'm expecting the blue dream to shoot up in height while the querkle lags behind under the 150 hopefully making up for loss of the mh light.. Also curious on how much you think I can yield per plant in the end. Thanks I''ll try to get pics later tonight..


I am also interested in having lights installed on the sides so the lower end is on the right track any suggestions on light combos? Im on a budget with both elctricity and cash for lights need the best value for my dollar.
 
jesus of Cannabis said:
check out HTGSupply if you are not DIY capable.
Click to expand...

yeah, nice website great prices. That's where the 150 watt came from thing is still brand new never got to use it.. they had some of the "HTG Supply 4 Foot 2 Lamp High Output T5 Fixture" for $60 before shipping was thinking about getting two of those but im sure I could build one or have one laying around from the garage.. Same thing different light bulb im assuming?
 
wexpac said:
yeah, nice website great prices. That's where the 150 watt came from thing is still brand new never got to use it.. they had some of the "HTG Supply 4 Foot 2 Lamp High Output T5 Fixture" for $60 before shipping was thinking about getting two of those but im sure I could build one or have one laying around from the garage.. Same thing different light bulb im assuming?
Click to expand...
Walmart has Fluorescent fixtures for under 10 bucks and I bought 2 T8 bulbs at Home Depot for under 8 bucks which I added to my 600 watt hps fixture. Im sure the output of the T5 is alot higher but for $18 total, what the hell!?
 
scratch the first idea. Through out the 150 watt hps and put in two more 400 watt hps bulbs in a dual fixture... should have a good yield
 
IMO I would get 2 conversion bulbs. Use the 150 HPS conv. bulb to veg ur clones under 150 MH. Then get a 400W MH conv. bulb to Flower under 400W HPS.
I wouldn't add too many more plants tho.. Unless you plan on lollipopping them because either way ur light penetration isn't gonna be that good. But thats just my opinion.
 
magik*420 said:
IMO I would get 2 conversion bulbs. Use the 150 HPS conv. bulb to veg ur clones under 150 MH. Then get a 400W MH conv. bulb to Flower under 400W HPS.
I wouldn't add too many more plants tho.. Unless you plan on lollipopping them because either way ur light penetration isn't gonna be that good. But thats just my opinion.
Click to expand...


yeah today it peaked at about 88* but still not too hot, I also have one more fan that I have been waiting to use. All 5 clones are under the 2 400 watt HPS and the one 400 watt MH hanging just about 2 ft above them and everything is looking nice! How do I go about figuring out the light penetration?

also wondering about how tall I can expect these to get, + REP to anyone who has a guess.
 
wexpac said:
yeah today it peaked at about 88* but still not too hot, I also have one more fan that I have been waiting to use. All 5 clones are under the 2 400 watt HPS and the one 400 watt MH hanging just about 2 ft above them and everything is looking nice! How do I go about figuring out the light penetration?

also wondering about how tall I can expect these to get, + REP to anyone who has a guess.
Click to expand...
They're gonna get as tall as you allow them to. I've read to let them veg til 18-24" tall cause they're gonna triple in size once they flower. Then I've read to let them veg for 5 weeks there's alot of advice out there. I've even read where someone started them on 12/12 light schedule. Didnt see what the outcome of that was. I've vegged mine til they pre-flowered (not by choice) and showed they were female. I was told topping is an excellent way to control height and it'll keep them bushy and healthy.
 
You must log in or register to reply here.

Similar threads

R
advice on choosing LED device
2
Replies
32
Views
3K
futurebanjo
futurebanjo
S
MK ULTRA or LA CONFIDENTIAL?
Replies
13
Views
967
skywalker707
S
Clutches
Little Help please.
2 3
Replies
41
Views
2K
Clutches
Clutches
S
Question about aging LED lights
Replies
14
Views
1K
420 Garden
420 Garden
S
Help with lights and nutes and my beginner questions please?
2
Replies
22
Views
2K
MissinThe90’sStrains
MissinThe90’sStrains
Back
Top