LIFE SUCKS

buzzardbreath · Mar 27, 2017

throwdo said:
Id let her lick my stick

ruby fruit said:
When im down i play rockbitch

that was like watching a bad hangover dream

Sir Napsalot · Mar 27, 2017

I cried because I had no shoes until I met a man who had no feet

whitebb2727 · Mar 27, 2017

curious2garden said:
I like mine, it worked great until the mouthpiece started sticking a little but that was merely annoying.

I use a flower mate 5.0s. If works great.

whitebb2727 · Mar 28, 2017

That was supposed to say it works good not if. It has 3 temp settings. You can use flower, oil and concentrate in it.

On a side note, life is good right now. Got an upgrade in my VA disability and a little bit of back pay.

Gary Goodson · Mar 28, 2017

So I made a small mod to my pax and now I feel like it hits! I thought the problem was that metal plate thing they use as a screen. It doesn't allow air flow and I feel like I run out of breath before I can get a good pull. So my solution was to use tin snips and cut a small slit on each side of the metal plate. Now I can get a good pull.

srh88 · Mar 28, 2017

Gary Goodson said:
So I made a small mod to my pax and now I feel like it hits! I thought the problem was that metal plate thing they use as a screen. It doesn't allow air flow and I feel like I run out of breath before I can get a good pull. So my solution was to use tin snips and cut a small slit on each side of the metal plate. Now I can get a good pull.

good idea

Gary Goodson · Mar 28, 2017

srh88 said:
good idea

Yea look at these replacement screens. It looks like the added wavy lines to the sides and dimples to lift it up a bit. I think they figured out there was airflow issues as well

srh88 · Mar 28, 2017

Gary Goodson said:
Yea look at these replacement screens. It looks like the added wavy lines to the sides and dimples to lift it up a bit. I think they figured out there was airflow issues as well

ill just cut mine like you did lol

Gary Goodson · Mar 28, 2017

srh88 said:
ill just cut mine like you did lol

lol let me know what you think

srh88 · Mar 28, 2017

Gary Goodson said:
lol let me know what you think

i dont know what happened, it was all a blur. my house is on fire and theres jizz everywhere. your instructions were unclear

Indacouch · Mar 28, 2017

srh88 said:
i dont know what happened, it was all a blur. my house is on fire and theres jizz everywhere. your instructions were unclear

I got the same results ,,however I don't even have a pax ....but the power lines near my house have a little metal wavy thing .....I was sure it was the same thing that Gar was talking about .......so snipped it,,and it appears I've pissed myself and forgot my name ......oh well,,no time to cry about it .....once I figure out how my legs work again ,,I gotta go pick the boy from school .

greasemonkeymann · Mar 28, 2017

Gary Goodson said:
Would not read again
Would not suggest to friends and fam

1 star

at first I totally agreed, in fact I was ready to leave bad yelp reviews and everything, but you guys pulled it out in the end
get your mind out of the gutter..

srh88 · Mar 28, 2017

greasemonkeymann said:
at first I totally agreed, in fact I was ready to leave bad yelp reviews and everything, but you guys pulled it out in the end
get your mind out of the gutter..

Bob Zmuda · Mar 29, 2017

@throwdo

It seems like your life sucks.

I suggest you go to the bar and find the biggest, meanest looking hombre you see.

Walk up to him, stare him dead in the eye and start furiously sucking his dick.

It's your only hope.

Indacouch · Mar 29, 2017

Bob Zmuda said:
@throwdo

It seems like your life sucks.

I suggest you go to the bar and find the biggest, meanest looking hombre you see.

Walk up to him, stare him dead in the eye and start furiously sucking his dick.

It's your only hope.

That will definitely up the suck factor

buzzardbreath · Mar 29, 2017

Gary Goodson said:
So I made a small mod to my pax and now I feel like it hits! I thought the problem was that metal plate thing they use as a screen. It doesn't allow air flow and I feel like I run out of breath before I can get a good pull. So my solution was to use tin snips and cut a small slit on each side of the metal plate. Now I can get a good pull.

Cool, I did the similar on my V2 pro vape. Works better, but now it's a tad hot on the inhale. I don't mine frying my taste buds for a good buzz though.

Gary Goodson · Mar 29, 2017

buzzardbreath said:
Cool, I did the similar on my V2 pro vape. Works better, but now it's a tad hot on the inhale. I don't mine frying my taste buds for a good buzz though.

The pax has 3 heat settings. I don't use the highest setting for that reason. But I also found this vented oven lid! Maybe this will help too?

BarnBuster · Mar 29, 2017

Gary Goodson said:
The pax has 3 heat settings. I don't use the highest setting for that reason. But I also found this vented oven lid! Maybe this will help too?

yeah I found the high setting too "hot" also and use the middle one. don't have a problem with the draw but have to constantly clean mouthpiece to keep it working right. PITA. you once called it a love/hate relationship, I would agree.

Gary Goodson · Mar 29, 2017

BarnBuster said:
yeah I found the high setting too "hot" also and use the middle one. don't have a problem with the draw but have to constantly clean mouthpiece to keep it working right. PITA. you once called it a love/hate relationship, I would agree.

I always felt like it just didnt hit right. It's better after the mod, but I hope the vented oven lid will do the trick. Hey someone else must have felt like that too, right? Or they wouldnt have came up with the vented lid in the first place.

Another mod i was looking into, was getting a stainless steel screen and cutting it to fit the oven. instead of the metal plate they use.

I'll keep y'all updated after I order the lid and try the screen thing. I just don't want to have an almost $300 vape collecting dust.

lokie · Mar 29, 2017

Gary Goodson said:
I always felt like it just didnt hit right. It's better after the mod, but I hope the vented oven lid will do the trick. Hey someone else must have felt like that too, right? Or they wouldnt have came up with the vented lid in the first place.

Another mod i was looking into, was getting a stainless steel screen and cutting it to fit the oven. instead of the metal plate they use.

I'll keep y'all updated after I order the lid and try the screen thing. I just don't want to have an almost $300 vape collecting dust.

LIFE SUCKS

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Virtually Unknown Member

Well-Known Member

Well-Known Member

Similar threads