Let’s grow some top shelf herb. Maybe some mids too!

framed up a new room, 9’6” ceiling and ive been rocking tents in here?

Haven’t taken pics of the flower room, but pieces are coming together and these little ones are chomping at the bit.

Kilz and flat white tomorrow, as soon as I have paint I’ll move in table and trays.

Sour lime og x mimosa, one of my personal chucks that I received back my keeper cut. Fully loaded with spider mites. After quarantining at a non growing location and spraying with sulphur religiously I have the “bootyclap” or “rootbeer skunk” cut back in my garden. She’s a beauty and I’m going to do fun things with her. Sweet sarsaparilla candy, and epic high.

Paint and electrical today. I still have to run a 30a line for my lighting controller, but at least i got the 120 utility circuit tied in.

More leaves

Such a happy picture!

Never underestimate how much of a pain in the ass doors are. All interior walls finished, took a bit longer but I can hang stuff now and get it cleaned up.

Got some mechanical work done today, in the room and some attic work too. Just have to tie in fans with flex and I’ll move the table in tomorrow. Tomorrow I’ll make a lot of progress, I think I have everything I need to complete. Glad to be done running around and waiting on orders for the most part.

A couple shots for fun., still have drainage to install still

Overhead work nearly complete, just need to tidy up the wires, but everything is strung out to the controller. The cmh is running off another circuit. I’ll have to wire in the controller tomorrow.

So this room is designed to operate as a sealed room. The duct running down the center is connected to an 8” fan and carbon filter, for added circulation and odor reduction. The system will operate with bottled co2 and the room will go into a purge cycle every 4 hours. Any input is welcome as this is my first time operating a sealed room with co2

48h no power, everything on pause except wiring in lighting controller. Lemonade out of lemons I guess.

Ok, thankfully I was able to hobble through 6 days no power. I guess that means I just had an extended dark period before flower. Wanted a little more bulk, but I’m just gonna roll with it. First 2 days had just 1 cmh, fired off #2 today. Seem to be ok, they were a bit cold but thank god I’m PNW and I was able to at least stay somewhat warm. Really thankful for all my gas appliances last week.

Although I was happy that I could do panel work with an added layer of safety during the outage. I’m confident in a panel, but it’s nice to know that it’s dead dead. My intended plan was interrupted by a few things that made me come to the conclusion that I needed a 60a sub panel to isolate the grow. When I moved in I replaced my electric range with gas, that freed up a spot where a 50a circuit was. I’ve been using 2-20a circuits that I installed in its place for my grow needs since then and has been sufficient. I’ve added up everything and it all checks out, so here we go. I seriously thought I was done spending money on shit.

Gotta grab a few random things for the 120v circuits, but glad the subpanel is in and lighting controller is tied in.

Moved the cmh out of the flower room, more on that in the next post. Got the ladies cleaned up a bit and I’ll just run 1 of the hps until I can fill the other tray. Temps are good, for the time being I’ll cycle outside air for free cooling connected to heat/cool controller and hold off on co2.

Veg space was extremely inadequate, was using 2-3x3 tents together to make a 6x3, worked out, but Not enough space to support the space and hold clones. Thinking 4x8 with 2-cmh will be my best bet for what I have. There are now 3 t5 fixtures gathering dust. Before and after, I’m tired I’ll get a table in there tomorrow.

Seedlings are about ready for transplant, picked up a few cuts today. Some will be for outdoor, others will find their way into indoor rotation. 32 site cloner cleaned up and new guts installed. Busy day on the farm.

My least favorite part