Led controller

Hi,

Recently brought a Growmau5 x kit from cutter and want to add some extra leds and have more control for my room as I will need to dim somewhat.

The problem is I want to be able to use 5v pwm from the LDD board and what ever comes from my ZPE 250-1400D drivers from cutter.

Was looking at the bluefish but feel it's to expensive. The storm has a converter but blocks temp probe and converter only leave 2 5v pwm channels.
Storm x has no converter. Channels will be as below.


10v pwm or 10v analog
Ch1. 5 cobs
Ch 2. 5 cobs

5v pmw
Ch 3. 4 to 6 far red 730
Ch 4. 8 to 12 red 660
Ch 5. 8 to 12 uvb 390~40
Ch 6. Undecided probably mix of red and blue that is don't already have.

Should I just get 2 storm controllers?

Tent is 1.4m x .8m currently powered by a 600w hps.

I would get one GrowGreen 6 channel with a two dimmers that it what I use. Actually I donot use the dimming I find it a waste of money. I use the on/off from 5v dimming to MW drivers and just use dimming on LDD drivers most efficient. Each channel has independent time control of on/off/ramp etc. https://growgreenled.wordpress.com/

VegasWinner said:

I would get one GrowGreen 6 channel with a two dimmers that it what I use. Actually I donot use the dimming I find it a waste of money. I use the on/off from 5v dimming to MW drivers and just use dimming on LDD drivers most efficient. Each channel has independent time control of on/off/ramp etc

Click to expand...

Thanks that looks really helpful.