Skyhiatrist
Member
Is it possible to run a say 150/250 watt HPS bulb through a 600 watt ballast or do you have to have the specific ballast for a particular wattage bulb?
Cheers Guys,
Skyhiatrist
Cheers Guys,
Skyhiatrist
Just a quick ballast question
- Thread starter Skyhiatrist
- Start date
LUDACRIS
New Member
Is it possible to run a say 150/250 watt HPS bulb through a 600 watt ballast or do you have to have the specific ballast for a particular wattage bulb?
Cheers Guys,
Skyhiatrist
if you have a 600w hps ballast you can run any wattage of lamp(hps/mh) up to a 600w.
you can also run an mh lamp in an hps ballast.
any wattage of bulb can be used as long as its 600w or under.
LUDA.
mygirls
Medical Marijuana (MOD)
might have been just me that had problems seeing that video. try this one..
http://www.youtube.com/watch?v=16A6nYQJEyc
AND THIS ONE ALSO
http://www.youtube.com/watch?v=d7fcjsDFOnA
Skyhiatrist
Member
Appreciate both replies guys but i think i will go with LUDA on this one, unless of course numerous people object???
Thanks guys!
Thanks guys!
LUDACRIS
New Member
this info was given to me by "mygirls".
and he is a growing master and a friend of mine.
he knows everthing about growing but thanks for the compliment.
LUDA.
Skyhiatrist
Member
might have been just me that had problems seeing that video. try this one..
http://www.youtube.com/watch?v=16A6nYQJEyc
AND THIS ONE ALSO
http://www.youtube.com/watch?v=d7fcjsDFOnA
Thanks for the honesty Luda, my apologies Mygirls new to the forum and didnt realise your post was for my benefit, thanks alot m8 very helpful!
Sky
LUDACRIS
New Member
Thanks for the honesty Luda, my apologies Mygirls new to the forum and didnt realise your post was for my benefit, thanks alot m8 very helpful!
Sky
i sent you a message.
click on my rollitup to view.
(good luck mate).
LUDA.
DoeEyed
Well-Known Member
It would not be a good idea to use a 150w HPS bulb in a 600w ballast. The reason you cannot put any of the HID type bulbs in a regular light fixture, is because these bulbs do not regulate their own current - the more power that is supplied to the bulb, the more it will use - the ballast is what controls the current entering into the bulb. So if you put, say, a 1000w bulb into that 600w fixture, it would safely operate at 600w for you. Anything smaller than the rated watts will use all the current it gets until it blows.
Skyhiatrist
Member
Message recieved LUDA thanks alot i can see am gonna like it here, great forum!
i can see am gonna like it here, great forum!
LUDACRIS
New Member
Message recieved LUDA thanks alot
no problem mate.
anytime.
(good luck).
LUDA.
LUDACRIS
New Member
Similar threads
