ICE WAX (bubble hash) with Matt Rize

MnH

Well-Known Member
yes twitch I am high... this is a hash thread and I am pRoducing extremely good haSh...so yes I am very hIgh. I would hoPe d be too. And reading my post I don't really think I was rambling. I adressed a few comments that matt has made regarding bubble man And His "Clownshoes Tek". out of curiosity are you referring to bubble man claiming he was going to steal your Method ForHimself Mnh??? I would love to see those screenshots . Where Are.They.Posted lol
But Yes Back To Thread .. Ice Water ExtraCt Is Incredibly Flavorful When Its Dried Of Its Water Quickly. First Stop TerpTown.[video=youtube;xi94A5DwztA]http://www.youtube.com/watch?v=xi94A5DwztA[/video]
You should check out his 'new' products. Lol.
 

Matt Rize

Hashmaster
When I have the fresh frozen trim do I let it sit in the mixing bucket with the water and ice or once I put it all in the bucket I begin mixing immediately also once I am done mixing do I let it sit for awhile before taking out the bags?? Someone plz answer my question I read all the pages and I can't find the answer anywhere
fastest possible is best.
 

MnH

Well-Known Member
Juicy Jeff it's all how you look at it. Bad material is never good to start with, but it's really only 'bad' in terms of yield. For instance, using my dry sift method, you can make this



From this in about 15 seconds. Shade plant, hardly watered last year, barely any frost or love.

 

Frenchy Cannoli

Well-Known Member
Bad material is never good to start with, but it's really only 'bad' in terms of yield
This is far from reality my friend, it is not about the yield or even its cleanliness but all about resin quality and % of terpenes.
Bad material = low resin quality most of the time. You are all too much into the look when it is all about taste and smell
 

MnH

Well-Known Member
So I should just not make products unless I have top notch materials? The strain was very fragrant and such, just not well taken care of. It was an outdoor shade plant left for dead kinda. Doesn't change the fact the method works on just about anything, even garbage like that.

Would it be better if I had top notch materials to be working with? Of course. But that's not really the point.

I have seen many people use bad trim in water bags and it didn't turn out worthwhile at all. Very green and after beating it up in the ice.. just.. not really all that melty due to contaminant. I'd much rather sift bad looking material like that than water bag it, but that's just preference.

By anyones standards that trim is ugly, but people generally say you can't make high quality products unless you have amazing starting material (i.e. super frosty) but that's just not true.

Obviously i'd prefer to be running super fire but that wasn't the intention of my wording when I said "bad". Sorry for the confusion. That said, i'd still rather puff on this than 99% of bho out there heh.

Cheers.
 

tobinates559

Well-Known Member
Bad material is never good to start with, but it's really only 'bad' in terms of yield
This is far from reality my friend, it is not about the yield or even its cleanliness but all about resin quality and % of terpenes.
Bad material = low resin quality most of the time. You are all too much into the look when it is all about taste and smell

so frenchy a have a bunch of weed that was grown/harvested/dried, very badly i can hardly smoke it, but i have alot...so my question is even if agitate very lightly and do everything right while making it into bubble will it just be terrible hash?? will it be worth my effort?? i feel it it could come out smokeable where as the buds are not
 

Frenchy Cannoli

Well-Known Member
so frenchy a have a bunch of weed that was grown/harvested/dried, very badly i can hardly smoke it, but i have alot...so my question is even if agitate very lightly and do everything right while making it into bubble will it just be terrible hash?? will it be worth my effort?? i feel it it could come out smokeable where as the buds are not
Impossible to say without trying, your chances of getting high quality are very low but you may get something good enough to smoke or make edibles.
 

MnH

Well-Known Member
so frenchy a have a bunch of weed that was grown/harvested/dried, very badly i can hardly smoke it, but i have alot...so my question is even if agitate very lightly and do everything right while making it into bubble will it just be terrible hash?? will it be worth my effort?? i feel it it could come out smokeable where as the buds are not
You didn't ask me but i'd say yes. Obviously the quality of the resin is important, but if it's all you got, there are ways of turning it into very nice product that is more enjoyable than what you've currently got.
 

trichmasta

Active Member
Thanks to Matt and his tech, this thread my ice wax game is purdy on point!! Just got back my test results on my Jesus OG and it tested at 71%!!!! blew my mind when the flowers only came in at 19.5. Blessed beyond belief to share this magic with the patients!!

Bless up!
 

trichmasta

Active Member
Is anyone using Nikka's Essential Bags 2.0?? In the market for a new set and would love to support a fellow Extract Artists innovations....
 

Kalyx

Active Member
Nice trich, good to see ya here still. I got real busy with life, gardens, movin.
flo70flash (1).jpg Great #s! Im sure that og IWE is real melty and top notch! I have the original essential bags and can comment that mine are great and going strong after years of full melt extraction… Flo 70 micron. Would love to get this tested after I make more, freezers full of fresh trims… stay cool and patient everybody, summers upon us!
 

trichmasta

Active Member
Kalyx what up ice water grow homie!!?? Thanks for the positive feedback...after 2 years my Xtraktor bags are ready to be replaced that's for sure; even heard Matt post in this thread that yield and sieve quality is poor with these....
Growing the best, cleanest flowers to make the most potent flavorful extracts is #1 in my hood always!!

Looks like some fire you got there as well dude!!!
 

trichmasta

Active Member
Yup! I couldn't believe it either...Fresh Frozen Jesus OG sugar trim, 5 gal wash machine, filtered water and ice cubes, microplaned after 24 hours, and bamm!! .44 CBD too! Pure melty terp-rich goodness!!!
 

Matt Rize

Hashmaster
Thanks a lot man for ur help but I actually just asking Matt rize I have read every single page and now I have a step by step system that is very detailed to Matt rize technique almost to the teeth but I just need one more step to finally complete the process and that is when the mixing bucket has been stirred up with all materials inside do I let it sit at all or just start straining bags don't get me wrong though bro I really appreciate ur help if u have any picks of the wax u made using ur method I would be really grateful to take a look at it and on the 29 th I am going to be making wax actually like on the April 1st I guess cause I gotta let the fresh sugar leaf only freeze
Drain when agitation is finished. No need to prolong exposure time to water.
 

Jay Es

New Member
Hey Matt. Thank you for this awesome guide. I'm still new to bubble hash and will be doing my first run soon.
I apologize if any of this is repeated information. I did spend the past week reading through and gathering as much information as possible. However, there are still some areas I'm unsure of and I would greatly appreciate any input.

Is there a big difference in final product based off the water you use? Was thinking of using tap water unless it ruins anything during the process.
Unfortunately I'm limited to dried buds. Would it still help if I froze them?
During agitation should I aim for a slow and long agitation or a slightly fast and short agitation as a first timer? Is there any difference in using a wooden or silver spoon?
I have a 220, 160, 120, 73, and 25 micron bag. I'm only using 28ish g on my first run, should I be using both the 160 and 120 bags?
How long do you cure your hash for?
I don't have a microscope or anything to really take a look at the trich on the bud. But since I'm using buds instead of trim, would you recommend doing a second run?

Once again, I apologize for reasking questions and really appreciate any input you can give. Your hash looks amazing btw :D Friend showed me some pics and there I went reading up on how to make it heh.
 
Top