I plead for your help

Yea thats basically the concept is just to push the warm air to a different room to get cooled off then move the cooler air to the bottom pushing the warm air back out the top and into the cool room. If you were to mount that 145 CFM blower in along one of the vents pushing the air throught that would work probably amazing you wouldnt need any sort of computer fans to push the air through as long as you have a fan moving air throught the vent it should work great.

about those fans at the top i'f just place one or two up there to cool down the temps up there

ttuason1369 said:

about those fans at the top i'f just place one or two up there to cool down the temps up there

Click to expand...

are u talking about the 12in table fan i suggested or are you talking about dome different fans?

like if you were to put the blower like in the pic just so if forcefully moves the air it would keep a constant air flow through both the rooms cooling the plants and the lights and the temp down

I'm talking just putting one or two up there to cool it down and have the blower push the air though out the rooms that blower would work if you used to push and pull the air thought the vents

wait so you think i should mount the blower at the top and have it sucking air from my flower into the cooling room but wouldnt the blower just suck hot air in then dispense thru the blower and essentially wouldnt that hot air jus make its way back downb to the flower room?

oh and would the 12 in fans be pointing out or toward the cardboard? this also leads me to ask you if my closet door stays shut or is it partially opened?

As long as you have air pushing (like you would with that blower) its hard for the air to backtrack, if you know what i mean... For instance like a vaccum if you've ever put your mouth over the vaccum hose and tried to breath It's very difficult because the air is being pulled by the vaccum one way and not both. If you dont know what i'm talking about try it you'll find out... Anyways back to the thread air is being force one way and one way only making it difficult for air to back track. the blower would basically force air though the top room to the bottom and as the air is being circulated to the bottom something has to replace the air at the top meaning the warm air that raises to the top of your bottom room is then forced to the top room.......I hope you kinda know what i meanif not just let me know and i can explain it better....

I'd probably face the fans away from the vents just to create more sir movement. Its a stealth way to circulate the air so you wouldnt have to keep the closet door open but if you'd rather then thats all up to you

You could actually mount the blower where ever you want as long as the air movement is in the right direction

ttuason1369 said:

As long as you have air pushing (like you would with that blower) its hard for the air to backtrack, if you know what i mean... For instance like a vaccum if you've ever put your mouth over the vaccum hose and tried to breath It's very difficult because the air is being pulled by the vaccum one way and not both. If you dont know what i'm talking about try it you'll find out... Anyways back to the thread air is being force one way and one way only making it difficult for air to back track. the blower would basically force air though the top room to the bottom and as the air is being circulated to the bottom something has to replace the air at the top meaning the warm air that raises to the top of your bottom room is then forced to the top room.......I hope you kinda know what i meanif not just let me know and i can explain it better....

Click to expand...

oooooooo.....i understand you see in your picture you had arrows going out from the blower like i would be using the blower to suck air out of my flower room...but what your actually saing is mount the blower, run the duct don through lower portion of cardboard with no extra pc fan needed, then use two pc fans to cool the light by mounting one exhausting near the light then run ducting to the pc fan that would working as an intake for the cooling room.....

ttuason1369 said:

I'd probably face the fans away from the vents just to create more sir movement. Its a stealth way to circulate the air so you wouldnt have to keep the closet door open but if you'd rather then thats all up to you

Click to expand...

first off i wanna thank you for puttin up with me. ok i understand all the air would be circulating but am i sure it will be cool air and not just warm air gettin moved around efficiently? also were do i mount the pc fan thats gonna act as an exhaust near the light if im gonna constantly be movin the light, or would it just make hella sense to basically leave the light at one height and supplement books and other thing under plants if they need to get closer to the light?

ttuason1369 said:

You could actually mount the blower where ever you want as long as the air movement is in the right direction

Click to expand...

and which way would be the right direction?, i also think i need to mention that the top shelf is not completely cut off from the flowering, theres about a 3 to 5 inch gap i think when the doors are closed, i would check but the lights are off. thats wha i mean about the air being sucked through the blower then all-in-one direction going back into the flower room because of the gap, should i use more cardboard or wood to block off the cooling section from the flowering area that way the air can be throughly mixed and hopefully the result will be cool air coming through the intake....

I'd leave the light stationary but thats me and yea i would have a fan blowing on the light to move around the air that isnt taken out from the vent. If you end up getting the blower you'd be able to find out what way the direction the air moves It would be dirricult for me to tell you i could just tell you that it either needs to suck air if you place it where it is in the pic.....Dont stress it man it's the least i could do seems as how i just found out 2 of my 3 are male and i still dont know my third one is yet, I'm so damn PISSED!!! But hope eveything works out good If anyother questions occur feel free to ask...

Thats a bit more difficult to think about, I'd try and block it off best you could and go from there

im gonna sketch some shit up dont go to sleep on me picasso

I'll be right here dont worry about me

Yep that right there is exactly how i personaly think it should and would work the best!!!

yea that looks fuckin sick on my paper, and mist likely even better once i get it goin. if it wasnt 330am over here and my lights werent off i think i would be working on this right now i'd love to set this up jus to get a mach run? and do you think i can hang the light from the bar using large mountain climber clips that'll fit on the bar, with bungee cords, or better yet i'd actally like to use a chain, how do people hang their hps lights and with what kind of chAIN?

That give it time for the air to cool down and be sucked down to your flower room and push the warm air up to be cooled and so on and so fourth. I dont see a single thing wrong with the design at all. What you could do if you wanted and I'm just throwing this out there for you to think about you could put the light on say like a chain with little C clamps of some sort because no matter what the warm air should raise while the cooler air sits at the bottom know...