jayovtipton
Active Member
get a small rvk fan on it tht will extract the unwanted smell thn ensure u gt the rite spec 1 for ur room 1 to powerful may disrupt the air flow in ur grow room
how to get rid of the smell?
- Thread starter Mah3r
- Start date
autotek500
Well-Known Member
you're an idiot... you're repeating basic fucking nonsence.....I'm not arguing with you any more .......CHILDREN!!!!!!! I don't have to prove my point for the fifth time......go huff some fucking fabreeze...and leave this for people who know what the are talking about....FOB>>>>
smppro
Well-Known Member
LOL
Dont get upset now little fella, you cant know what your talking about if have never tried it
Like i said nice try now go finish your homework
autotek500
Well-Known Member
I repeat childish....
rasclot
Well-Known Member
i dalt it very much the chemicals in febreeze would ruin the plant with no doubt
smppro
Well-Known Member
greenearth5
Well-Known Member
tell her to wash her stinkin panties
autotek500
Well-Known Member
Del, just do like I do and water your plants with fabreeze , this way you kill two birds with one stone.....lol....
autotek500
Well-Known Member
Will do......
greenearth5
Well-Known Member
what are you going to do if you weed taste like fabreeze.. even if you flush your plant out then it might still have some febreeze in it
smppro
Well-Known Member
Hey man that guys knows what he is doing, just let it be
del66666
Well-Known Member
del66666
Well-Known Member
Hey man that guys knows what he is doing, just let it be
im sorry but i strongly disagree with you, i really havent a clue what im doing.
mrbuzzsaw
Well-Known Member
i am gonna give you the best simple answer
takew panda film and stretch it over the door. use velcro to make it stick
all the way around. put a 2 by 4 on the bottom with velcro as ell so it seals the closet.
then get some ducting and a small carbon filter an inline blower and you are 90% ready to go
take a 4 foot piece 3 inch ducting and lay it out take a rezor blade and gut a x into the pands film 2 inches and press the 3 inch duct into it it should be tight.
then make aa 3 inch hole somewhere else up high and stick a 4 inch duct into that one this is your out.
hook the blower up so it blows out the hole.
what you want is this
filter with a blower sucking air through it and blowing it out of the 4 incy upper hole.
the lower 3 inch is pasive air intake
what you are looking for is the panda film sucking into the grow room
if the panda film is pulling into the room you have negative pressure and you will have no smell!
takew panda film and stretch it over the door. use velcro to make it stick
all the way around. put a 2 by 4 on the bottom with velcro as ell so it seals the closet.
then get some ducting and a small carbon filter an inline blower and you are 90% ready to go
take a 4 foot piece 3 inch ducting and lay it out take a rezor blade and gut a x into the pands film 2 inches and press the 3 inch duct into it it should be tight.
then make aa 3 inch hole somewhere else up high and stick a 4 inch duct into that one this is your out.
hook the blower up so it blows out the hole.
what you want is this
filter with a blower sucking air through it and blowing it out of the 4 incy upper hole.
the lower 3 inch is pasive air intake
what you are looking for is the panda film sucking into the grow room
if the panda film is pulling into the room you have negative pressure and you will have no smell!
mrbuzzsaw
Well-Known Member
i am gonna go out on a limb and say no!
you should not use fabreeze in the plant room itself
it will get itno the plants i think.
it is for passive use outside
if you simply create negative air pressure the problem is resolved.
lower the air pressure in the room and filter.
problem solved.
panda film is your friend!