how keep tent from collapsing from pressure

green_machine_two9er said:

It’s pretty simple. Increase negative intake openings. Million ways to open a path for air and filter/ lightproof at the same time

Click to expand...

i can't. light and space issues. i have a single air input and it has an intake fan.

xtsho said:

Turn the fan down. What size is the tent and fan?

Click to expand...

1.7x3x5 fan is a vivosun 440cfm turned all the way down. it just sucks.

Fan controller - simple and easy to adjust.

Home Depot has some shelving that works well for the walls coming in, storing a pair of scissors.
Maybe even a string to tie up a plant.


Looks like the humidifiers out of water too.
Enjoy

Budzbuddha said:

Fan controller - simple and easy to adjust.

View attachment 5165723

Click to expand...

i have a built in controller, it just doesn't go to close to zero without going to zero...at hte current speed I am having humidity issues...not super bad, but i am hitting just above 55% at night.

Splinter7 said:

but i am hitting just above 55% at night.

Click to expand...

And what’s so wrong about that?

As long as air movement and temps are within range that 55% RH should be golden.

jondamon said:

And what’s so wrong about that?

As long as air movement and temps are within range that 55% RH should be golden.

Click to expand...

ok. i guess i have kept it a bit lower during flower. research says it's probably good. i like the skeleton solutions the most...especially if i have the other parameter worked out...still, those bungies are doing some work. thanks for the help

Furring strips held by zipties.

High CFM kits work great. Just make sure to get the right size diameter. I use 2 sets for every tent.



Spend a few bux and do it right.

V256.420 said:

High CFM kits work great. Just make sure to get the right size diameter. I use 2 sets for every tent.

View attachment 5166638

Spend a few bux and do it right.

Click to expand...

Holy crap that tent is gross. Please clean it.

twentyeight.threefive said:

Holy crap that tent is gross. Please clean it.

Click to expand...

LOL! I just got done emptying it. Give an old man a break will ya

V256.420 said:

High CFM kits work great. Just make sure to get the right size diameter. I use 2 sets for every tent.

View attachment 5166638

Spend a few bux and do it right.

Click to expand...

i haven't seen 36"x20" though. probably just diy now.

Like some people suggest with wood slats and zip ties, I use aluminum angle. You can get it at big box hardware but if you have a metal supplier nearby it will be a lot cheaper. I don't remember what profile I used but whatever is smallest will work fine. It doesn't need a lot of strength. With wood prices like they are the aluminum is probably cheaper.

At a metal supply the angle will come in 20ft length. They will cut it to size if you ask them to, often with no charge. All you have to do is drill the holes and zip them in place.