Hlg-600h-48b wiring help!

I have recently acquired a led lighting that needs to be hooked up to this Meanwell HLG-600H-48B driver. There isn't much to go off of on the internet about this driver and it has extra features I don't know much about. I would like to just hook up my lights and get it going...

I have 2x chinese made boards with samsung 561c s6 diodes and the driver (already attached the plug).

From the other end, it lists..
RC+, RC- & GRD, +5Vss
DIM(Not installing)
And two other -V and +V.

Please help me with a simple method to get it wired and working. Thank you!! ^^v

the side with one lead coming out is for the plug to go in to an outlet the side with the v- v+ are to go in the plus and minus on the board then link the same on the other board or do a search on you tube. here you go

Use only one of the two pairs for the v's? I have 2 led boards. I just attempted to connect them using wagos and both v's but the boards didn't light up.

one will be the dimming the other will be the output

By the way you want to watch part 4 to understand a constant voltage driver that is the driver you have

Ok, so there's 4 leads on the right.
Rc's, dim, v's, and v's...
So I connected both boards to both "v" leads... im not doing a dimmer so i jist want 100% output. To be clear, you are telling me that the second "v" lead is a dimmer?

Ok thank you!

Are you really going to only use two boards on that driver?.
You really should post.the details of your boards.before you do anything.

I wouldn't mind one of those drivers, I have 7 unused 100W strips
Ordering drivers next week, just had a message from the bank.

Details: 280x900x2.0mm(L29.52"xW9.18") , 3.0/W conductivity,2OZ, 16S50P, 129.6-372W, 43.2-49.6V, 800pcs Samsung 561C s6 leds



Product Name Samsung 561C S6 led diodes
Substrate Material Aluminum PCB
Thickness 2.0mm
Smallest aperture 0.003"
Surface treatment HASL
Modle PCB Board
Driver Without driver
Brand MEIJIU LIGHTING
LED Type 800pcs SAMSUNG 5630 S6 LM561C
Current: 3000mA-7500mA
Power 129W-372W
Voltage 43.2V-49.6V

There's a total of 800 diodes from 2 boards.

Ah ok it's the longer boards, carry on it. Was worried in case it was the smaller qb,s like Hlg sell..
Be nice to see these running and growing the herb

thank you for the help! I truly appreciate the time.

Holy heck these are bright! Thanks everyone!

Just keep and eye on the boards temperature if you are running without heatsinks at full power.

It's hard to see the heat sinks because it's black but I got it covered

That is a fair amount of amps at full blast be careful

I will go with what the vid had setup and grab a nice pot or dimmer. Tyty!

He does explain it so it is easy to understand

I like it. broke it down Barney style!