HELP me hack up my blurples! Cob Advise plz

I need the LED gods on here to help me hack up 4 blurple lights. I want cobs around the $25usd or below price range per chip. What will work with these drivers? I have a total of 8 drivers, 2 per light. Honestly i've already disassembled everything and it looks simple. Keep everything wired as is and just mount and wire the chip on the existing heatsinks/fans. I can tap the heatsinks and whatnot to mount the chip. Does it need a holder or can they be mounted directly? Any help is appreciated, Thanks Guys!

Output
60-90v DC
60 Watts 630mah

Oh forgot to mention the fan has it's own power supply. 2 cobs per driver? Thinking maybe Citi 1212 gen 6 80-90cri. Is 30w a cob worth it or should i just find a better single cob per driver option? Sorry for a million questions i'm new to DIY led.

There's no other driver information on the device?

SwiSHa85 said:

Oh forgot to mention the fan has it's own power supply. 2 cobs per driver? Thinking maybe Citi 1212 gen 6 80-90cri. Is 30w a cob worth it or should i just find a better single cob per driver option? Sorry for a million questions i'm new to DIY led.

Click to expand...

Go to the Lighting sections. There's folks there who are up on it.

SwiSHa85 said:

I need the LED gods on here to help me hack up 4 blurple lights. I want cobs around the $25usd or below price range per chip. What will work with these drivers? I have a total of 8 drivers, 2 per light. Honestly i've already disassembled everything and it looks simple. Keep everything wired as is and just mount and wire the chip on the existing heatsinks/fans. I can tap the heatsinks and whatnot to mount the chip. Does it need a holder or can they be mounted directly? Any help is appreciated, Thanks Guys!

Output
60-90v DC
60 Watts 630mah
View attachment 4211560

Click to expand...

Just out of curiosity, what are the dimensions of your fixture? Reason I ask is that I hacked my old King 1200w fixture and it had the same forward current rating on the drivers. I ended up using some Vesta strips-they are designed to operate at up to 1000mA so your driver will not run them too hard.

All 4 pull 125ish wall watts

This is all the info I can get without pulling out the multi-meter.

1x high speed whisper quiet 12025 fan plus all new upgraded 0603 aluminum cooling heat sinks, good temperature even worked 24 hours.
AC-DC PF>0.97 power supply, 1 on/off switch per driver.

Specificationsimensions: 31x17x6cm
Item Weight:2.2kg
Replaces a 250 watt HPS/MH
Avg. Power Draw: 120±3% watt
LED Quantities: 60pcs 5Watt Bridgelux/Epileds
LED Lens: 90°/120°Mixed
Input Voltage: AC100-240V
Frequency: 50-60Hz
Lifespan: 50,000 hours
Core Coverage at 24" Height 2.5x2.5ft
Max Coverage at 24" Height 3x3ft

The heatsink is the same size as the fixture with a decent thickness. I got these lights dirt cheap, tried them one run on some auto's and now they're just collecting dust. I figure 2 36v chips per driver. So 4 chips running 30w each on 1 heatsink with active cooling. So total of 16 chips between the 4 lights. Someone shout out some of the vendors or DIY guys that can help me purchase 8-16 chips with thermal pads.

Decent size fan and heatsink for active cooling some cobs