p0opstlnksal0t
Well-Known Member
ive been looking at these table top presses capable of being flipped on their side to gravity drain rosin to a collection underneath it.
I was toying with the idea of modifying a Dake/baileigh/strongway 10 ton table top press to be able to easily flip it on its side to mimic this drip tech method. i could get the press for about 350 shipped, lowtemp 4x7 caged plates + dual controller for 720.00, then about 300-400 for a local metal shop to weld up the table to fixed height, chop the legs down, and modify for easier horizontal operation and flipping. this would only be a 10 ton when done..
there is also this FV Rosintech "rollie" drip tech press i found online on another forum. looks to come in around 1600 bucks without pump... i could couple it with a nice little manual/pneumatic operated remote pump. this unit is a 20 ton and well designed/suited to high production horizontal operation and it has a little bigger plates (5x7)
I was toying with the idea of modifying a Dake/baileigh/strongway 10 ton table top press to be able to easily flip it on its side to mimic this drip tech method. i could get the press for about 350 shipped, lowtemp 4x7 caged plates + dual controller for 720.00, then about 300-400 for a local metal shop to weld up the table to fixed height, chop the legs down, and modify for easier horizontal operation and flipping. this would only be a 10 ton when done..
there is also this FV Rosintech "rollie" drip tech press i found online on another forum. looks to come in around 1600 bucks without pump... i could couple it with a nice little manual/pneumatic operated remote pump. this unit is a 20 ton and well designed/suited to high production horizontal operation and it has a little bigger plates (5x7)