First Time Situation

Storm

Active Member
I just got done with my first harvest, and I was trimming over a span of 4 days or so, cutting the smaller plants first, and letting the bigger ones dry out in that time (still alive), to reduce risk of mold. My tent is small, and vented with a 6" inline fan, and I also have two cage fans inside the tent (clip on), and have never seen any sign of mold. The first plant to get trimmed was monday night, and by friday night, the stems were mostly snaping, but the buds were dry on the outside with a bit of resistance on the inside (not too wet and spongy like they were when fresh). I have been smoking the popcorn for the past few days and letting the tops (in a separate jar) cure, burping every 4-7 hours for 15 minutes or so and moving the buds around in the jar. The other plants (still drying) are all from different days last week, meaning they should theoretically be dry 5-7 days from the original day of trimming correct? (pending size, etc) Having been reading up on mold, and other issues I worry I may have snipped the branches with those bigger colas (from monday) too soon and risk a chance of mold. I just inspected a few of the colas with my scope, and everything looks dandy. I have seen a ton of good bud, and there are no imperfections that I can obviously see. The temps in this room are 68-75 degrees, leaving a perfect 78 in my tents. My dry box is in this room which the inline clears every 6-8 minutes i assume. Hopefully someone can let me know if I jumped the gun and (monday night to friday night) is not enough time for drying in my current conditions. I pointed one of the smaller fans at the string about 5 feet away for a day or two, and realized that was not a good idea. The bud that is in my jars was cut when the grassy smell (gasses expelling) was gone, so I think I am OK. Let me know.
 

rooky1985

Active Member
You did it just like I would have, 5 days to dry in low humidity is very common. Keep burpung those jars and you will be fine, I am not as dilligent with my burping as you are and I have never had mold (indoors).
 

Storm

Active Member
Ok, great. I figured the people who get mold are those who did not spend the money on a proper exhaust fans in the grow area.
 

rooky1985

Active Member
Ok, great. I figured the people who get mold are those who did not spend the money on a proper exhaust fans in the grow area.
I'm sure with very little movement it is possible but your set up sounds pretty good IMO. I have only had mold outdoors with a really wet fall.
 

Storm

Active Member
Glad to hear man, I spent 30 bucks on fresh jars and packed them with a small amount of extra air so they can breathe and expand and collapse or whatever they do in there. Is there any sure way to tell when the bud is really dry without relying on the stems? my tests have already used up most of the available places.
 

rooky1985

Active Member
Glad to hear man, I spent 30 bucks on fresh jars and packed them with a small amount of extra air so they can breathe and expand and collapse or whatever they do in there. Is there any sure way to tell when the bud is really dry without relying on the stems? my tests have already used up most of the available places.
I can tell by the feel, if you jar them too early just pop the top off the jar till the outside of the bud starts to get crispy then cap the jar. Now that you know relatively how long it is taking to dry just keep them hanging for the 5 day period then jar em up.
 

Storm

Active Member
Haha man that is exactly what I did on instinct :) Dry on the outside, but moist enough on the inside to be fresh but still snap in half.
 
Top