HghFlyrJD1
Active Member
I have a Larger Grow room setup in the works in another location its alil far for me to be really be involved wit it much without driving across town.,but i wanted to have something small but something that could "MAYBE" give me 2OZ per plant?Lets see.Could some one else with more knowledge on how many Lumens this adds up to Let me know this is Equaling to.Mind you i started this at 3pm today,With alot of help from my brother in law on this lil project.Lined with foil or now.I have 3 Sockets on each Side with a Y adapter in each Equaling 6 bulbs on each side For 12 bulbs Total on the sides,And 4 more CLFs hanging from the top so i can move them as i need and im gonna add a reflector to this and to the side bulbs.A Hinged Front flap door.I plan to run 2 plants and maybe 2 smaller babies or clones when i can or need.With the light low i have space to put small pots on top of the "hood" too.
Dimensions: N/A Yet.
Lighting:
16-26watt.1610Lumens(100 Watt Equiv.)...416Watts(Equiv.To 1600 Watts?)6500K 1750Lumens CFL Bulbs.
Ventilation
lan: 1-2 Fans at the top and have a passive air flow system with vents or even a small fan at the bottom.
Updates coming soon.Thx
Any Thoughts or Opinions..I already know CFLs wont put out what HPS and others can Yield wise, but this is all i ave space and funds for is a small project at my office.
Attached Thumbnails
Later
Ok So we Wired the Side lights and the "hood" and im gonna finish connecting the 2 sides to the main line as well as wiring the "hood"to this. I Upgraded the "HooD ALil .I Cut Away wood that was not needed to allow more light to pass.and Then i lined it with this "Coin Finnish Duct Tape"and I added loop handles to the top of the Box to help adjust the "HOOD"s height.Im looking for ideas to make up a Reflector for the "hood" and smaller shield type reflectors for the side bulbs.Hope to have it Finished tomorrow sometime.And get a Clone or 2 to start with ASAP...HINT HINT...
Ventilation????
Whats the best way to run 2-4 5inch fans?1 or 2 up top blowing OUT.then 1 or 2 in the rear low center blowing IN??
Attached Thumbnails
More to come tomorrow, I hope to Finnish this up. .
Dimensions: N/A Yet.
Lighting:
16-26watt.1610Lumens(100 Watt Equiv.)...416Watts(Equiv.To 1600 Watts?)6500K 1750Lumens CFL Bulbs.
Ventilation
lan: 1-2 Fans at the top and have a passive air flow system with vents or even a small fan at the bottom.Updates coming soon.Thx
Any Thoughts or Opinions..I already know CFLs wont put out what HPS and others can Yield wise, but this is all i ave space and funds for is a small project at my office.
Attached Thumbnails
Later
Ok So we Wired the Side lights and the "hood" and im gonna finish connecting the 2 sides to the main line as well as wiring the "hood"to this. I Upgraded the "HooD ALil .I Cut Away wood that was not needed to allow more light to pass.and Then i lined it with this "Coin Finnish Duct Tape"and I added loop handles to the top of the Box to help adjust the "HOOD"s height.Im looking for ideas to make up a Reflector for the "hood" and smaller shield type reflectors for the side bulbs.Hope to have it Finished tomorrow sometime.And get a Clone or 2 to start with ASAP...HINT HINT...
Ventilation????
Whats the best way to run 2-4 5inch fans?1 or 2 up top blowing OUT.then 1 or 2 in the rear low center blowing IN??
Attached Thumbnails
More to come tomorrow, I hope to Finnish this up. .
