First Grow in a Shed - Temperature Fluxuations

r6ironman

Active Member
Hello All,

First time grower here. I have built a sweet rubbermaid grow box from some different ideas I have seen on this site and others. I cannot keep this in my house, so I am going to have it in my shed outside.

I know the temperature will vary between night and day, how much I have no way of knowing. And where I live the humidity can be very bad.

Has anyone here have any success with a similar type situation? Is one seed strain favorable in this type of situation?

Should I set the light timers to run at night when the temp drops to keep a more constant temp in the box?

Any help and guidance will be appreciated.


Thanks
 
Hello All,

First time grower here. I have built a sweet rubbermaid grow box from some different ideas I have seen on this site and others. I cannot keep this in my house, so I am going to have it in my shed outside.

We like picture's got any?

I know the temperature will vary between night and day, how much I have no way of knowing. And where I live the humidity can be very bad.

A weather man might be able to help you, and thermometers/hygrometers are necessary for growing inside, even if its outside. Get one that records temp measurement fluctuation for a 24 hour period, around $25.00 in the US. Al B explains why a dehumidifier in necessary for this situation, get one.

Has anyone here have any success with a similar type situation? Is one seed strain favorable in this type of situation?

Should I set the light timers to run at night when the temp drops to keep a more constant temp in the box?

Any help and guidance will be appreciated.

In order to have success in this type of situation your need to establish a controlled environment, you have to 'insulate' your box from the ambient air temperature. In addition, you may have to provide heat, like I do, or air conditioning, which I will have to do this summer. For a good picture of what you need to do for your area, visit whatever big box store is available in your area and view the cut-aways they show of where and how to insulate for your area.
Once you have your box insulated from the ambient air temperature, you can concentrate on controlling the 'inside the box' environment. Anything you do, like running your lights during the coldest times like I do in the winter, can effect the efficiency of the enviroment, only if it is a 'sealed' environment. Pictures!!! It can be done, it does require work.


You are welcome, welcome to the forum. VV:blsmoke:
 
Thanks for the work you put into your response. I really appreciate it. Just for that, I will get some pictures of the box I made. I will try to get it tonight. I am really proud of it. Wether it will work or not is yet to be seen.
 
Here are the pics as promised.

These show the basic setup. Two rubber maid boxes one on top of the other both lined with Mylar.

There are 6, 100 watt equivalent CFLs on an adjustable chain so it can be raised up and down. Trust me, it is super bright. Is it too bright?

There are two fans also. The one on the bottom blows air in and gets air from inside the shed. The fan up top near the light blows air out, and is vented to the outside of the shed.

I did a rough test and came up with this. At the time the photos were taken it was 60 degrees F inside the shed. After an hour with the lights on, the temp was 78 degrees F inside the box. The thermometer was on the bottom of the box and the lights were raised to the very top. Both fans were on.

The fans are 70mm PC fans.

I was surprised that it got that hot.

Any comments, suggestions?
 

Attachments

  • IMG_1660.JPG
    IMG_1660.JPG
    267.3 KB · Views: 27
  • IMG_1663.jpg
    IMG_1663.jpg
    24.6 KB · Views: 8
  • IMG_1664.JPG
    IMG_1664.JPG
    239.5 KB · Views: 16
Ok now I can see what you are talking about. A small heater, may be needed at times. I would run with what you have there and make adjustments as necessary. VV
 
Back
Top