Ever Make Your Own DIY Flood and Drain Table?

xtsho

xtsho

Well-Known Member
I made a couple of these years ago and ran them alongside a couple tables. Filled the bottles with hydroton and set the pump on a timer that pumped from a 18 gallon reservoir. Worked great. You could change the dimensions or amount of sites to fit your space just fine. It works as good as those fancy systems that cost hundreds of dollars. It just doesn't look as pretty but does the same thing.

If you're growing in coco you can also look in to blumats and not worry about draining.

As far as building a flood table you're best off just buying a plastic 3 x 3 tray for $40 and building something to set it on.




 
BobBitchen

BobBitchen

Well-Known Member
FarmlingtonFooj said:
Typo, my bad. I meant, does your tray sit 1 foot above the floor? I'm tired of always throwing my back out when I'm in the garden, so having the plants elevated is going to help a lot. Although, I only have about 6 feet of height to work with in my tent, so I can't set them up too high.
Click to expand...
My tray height is about 14" from the floor.
You can build it to your desired height with the PVC, also if you don't glue the connectors, you can switch out different size legs until you dial the height works best for you.
 
Nizza

Nizza

Well-Known Member

30 x 30 pan - Google Shopping

www.google.com www.google.com
www.webstaurantstore.com

Kids Tables and Chairs

If you’re looking to outfit your daycare center or child-friendly restaurant with child-sized furniture, our kids dining chairs are perfect. These products have smaller constructions, making them comfortable and easy to get into for children of all a
www.webstaurantstore.com www.webstaurantstore.com

30 x 30 pan would be nice to give yourself 6 inches on two of the sides, so air can come from underneath the table and up.
So with that being said, I have a 4x4 table set up in my 5x5, to allow 12 " on two sides. I used two 2 by 4 foot fold up tables and slid totes underneath, and spaced the tables apart a few inches. Under the table i have my air intake, two different reservoirs, and a drain bucket. The two reservoirs go to drip feeders.

the tables i got ended up with adjustable legs so that is pretty cool, I really dig how clean it is, and the tables can break down easily if I wanted to put them away
 
Last edited:
xtsho

xtsho

Well-Known Member
Nizza said:

30 x 30 pan - Google Shopping

www.google.com www.google.com
www.webstaurantstore.com

Kids Tables and Chairs

If you’re looking to outfit your daycare center or child-friendly restaurant with child-sized furniture, our kids dining chairs are perfect. These products have smaller constructions, making them comfortable and easy to get into for children of all a
www.webstaurantstore.com www.webstaurantstore.com

30 x 30 pan would be nice to give yourself 6 inches on two of the sides, so air can come from underneath the table and up.
So with that being said, I have a 4x4 table set up in my 5x5, to allow 12 " on two sides. I used 22 by 4 foot fold up tables and slid totes underneath, and spaced the tables apart a few inches. Under the table i have my air intake, two different reservoirs, and a drain bucket. The two reservoirs go to drip feeders.

the tables i got ended up with adjustable legs so that is pretty cool, I really dig how clean it is, and the tables can break down easily if I wanted to put them away
Click to expand...
I've been looking around for an adjustable table to put in my tent so I can aise that instead moving my light down when I put new plants in and raising it as they grow. But I need something that can collapse to a really low profile. I haven't been able to find anything off shelf but I found this while looking around that uses a scissors jack. I just happen to have a couple in the garage. I also have everything else I need. I just have to get off my ass and build it. Raise it up when I start new plants and lower it as they grow. That way I wouldn't have to move my light and I could get straighter runs for my ducting as I wouldn't need the extra I have to accommodate different light heights. I wouldn't make like this one but the concept of the scissors jack is what I'll use.

 
xtsho

xtsho

Well-Known Member
Nizza said:
that is a badass idea!!
Click to expand...
I know. I was looking at images of adjustable tables and ran across it. The problem is my scissors jacks only go 15" so I'd have to buy a 30" RV scissors jack. I like the concept it's the implementation that might pose some challenges.
 
Metasynth

Metasynth

Well-Known Member
It's easy to make your own flood and drain tables. I did it myself. I make them out of Concrete Mixing Tubs from Lowes. Some Lowes concrete mixing tubs have flat bottoms and straight sides, where as the ones at home depot have rounded edges which reduces the usable footprint.

Then I use a 27 gallon Tuff tote as the reservoir. I use a 1/2", with a 3/4" drain. I used standard flood and drain bulkheads from a Hydro store, but they were cheap and you can order them online too.

Built the table out of 1" PVC. Then just add a pump and some tubing. You'll need a hole saw attachment for your drill.

1588013652041.png

1588013600570.png

1588013716323.png
 
Metasynth

Metasynth

Well-Known Member
xtsho said:
I've been looking around for an adjustable table to put in my tent so I can aise that instead moving my light down when I put new plants in and raising it as they grow. But I need something that can collapse to a really low profile. I haven't been able to find anything off shelf but I found this while looking around that uses a scissors jack. I just happen to have a couple in the garage. I also have everything else I need. I just have to get off my ass and build it. Raise it up when I start new plants and lower it as they grow. That way I wouldn't have to move my light and I could get straighter runs for my ducting as I wouldn't need the extra I have to accommodate different light heights. I wouldn't make like this one but the concept of the scissors jack is what I'll use.

Click to expand...
That's my drill...lol

C5B84255-9072-4592-95B6-58E6392E4E70.jpeg
 
BobBitchen

BobBitchen

Well-Known Member
FarmlingtonFooj said:
Do you ever have problems with light leaks? I used passive intake in the past and it worked great, but I was always worried about herming out my plants during flower.
Click to expand...
The tent vents are below the table/tray levels, in fairly dark rooms. I have this same set up in 3 of my tents, all with trays & I've never had a problem.
 
A

Apalchen

Well-Known Member
Like others have already mentioned a washer tray. 4 plants in 3 gallons is not too many as long as the veg time is right, I ran 4-5 plants in 3x3 for years. I also used to do 9 when pheno hunting in 1 gallon pots.
If height is an issue u can always just do a shop vac which is what I always did in the 3x3. I put saucers under the plants and had a small shop vac, doesn't take long at all and you get to use the full height of your tent.
 
Prince Vegeta

Prince Vegeta

Well-Known Member
BobBitchen said:
on the cheap, you can do a DIY PVC table & buy a Washer tray from home depot that will fit in a 3x3
Click to expand...
@BobBitchen ive seen similar posts and replies to this topic. im also curious so follow along. ive also seen others recomend that washing machine tray as a flood tabe. will this work with 4 in square plastivc pots? i was under the impression i had to flood to about halfway up my pot. how do i do that with such a shallow basin like this ? im about to try my hand at flood and drain but im broke and those trays be expensive AF but their also much deeper than the washing tray. whats wrong with my thinkng as im clearly wrong.
 
BobBitchen

BobBitchen

Well-Known Member
Prince Vegeta said:
@BobBitchen ive seen similar posts and replies to this topic. im also curious so follow along. ive also seen others recomend that washing machine tray as a flood tabe. will this work with 4 in square plastivc pots? i was under the impression i had to flood to about halfway up my pot. how do i do that with such a shallow basin like this ? im about to try my hand at flood and drain but im broke and those trays be expensive AF but their also much deeper than the washing tray. whats wrong with my thinkng as im clearly wrong.
Click to expand...
Sorry, I run drain to waste, top feed, and
I no longer use the washing machine trays, needed replacing too often, i don’t think I would trust the them in a flood system either. I invested in proper trans.
 
curious2garden

curious2garden

Well-Known Mod
Staff member
BobBitchen said:
Sorry, I run drain to waste, top feed, and
I no longer use the washing machine trays, needed replacing too often, i don’t think I would trust the them in a flood system either. I invested in proper trans.
Click to expand...
Same here, I just bought another Botanicare 4'x4' ID tray in white:

I can't risk my second floor falling on my head and there's just too many 'accidents' with stoned gardening (for me anyway :lol: )
 
You must log in or register to reply here.
Top