DWCUC Currently 32 Days

Chumpkilla · May 13, 2016

Hello all,
Just checking in for some tips.

Im at 32 Days (Still in Veg) (White Widow Feminized). My plan is to scrogg and super crop until i have a nice canopy of buds spread out.

When should I start pruning? I already have, my thought is to keep the lower half semi clean so when I start topping all energy will be focus into the new tops.

I have already topped it once. I plan on topping once more.

What are your thoughts, this is my first grow.

(Incase you would like to see my setup check it here
https://www.rollitup.org/t/my-first-grow-white-widow-feminized-dwcuc-32days.909067/#post-12592503)

This is my first grow.

Chumpkilla · May 13, 2016

Just FYI picture of root ball. Just did nute change so they are yellowish. Before the nute change they were Brilliantly white. (Before someone says I have beginning stages of root rot)

firsttimeARE · May 13, 2016

What you feeding it? Looks like slight nute burn to me.

Its ok to have tan roots. They dont look mushy so thats a good sign.

Looks good for your first grow.

Chumpkilla · May 13, 2016

firsttimeARE said:
What you feeding it? Looks like slight nute burn to me.

Its ok to have tan roots. They dont look mushy so thats a good sign.

Looks good for your first grow.

I had a small PH issue about a week ago. I noticed it made some of the leave develope weird. (For got to set my ph controller for "control" instead of "monitor")
Is that the slight nute burn your talking about?

trying to learn all i can.

Thx

Anon Emaus · May 13, 2016

I wouldn't worry about pruning yet, get the net on and start tucking that big one. I like to train as soon as possible to shorten the overall time.

firsttimeARE · May 13, 2016

Chumpkilla said:
I had a small PH issue about a week ago. I noticed it made some of the leave develope weird. (For got to set my ph controller for "control" instead of "monitor")
Is that the slight nute burn your talking about?

trying to learn all i can.

Thx

pH causes leaf wrinkle and nutrient lockout

nute burn is caused by too much nutrients. the orange tip and yellowing along margins and the dark green leaves are a dead giveaway.

what are you feeding it? and at waht level.

Chumpkilla · May 13, 2016

firsttimeARE said:
pH causes leaf wrinkle and nutrient lockout

nute burn is caused by too much nutrients. the orange tip and yellowing along margins and the dark green leaves are a dead giveaway.

what are you feeding it? and at waht level.

I am using the General Hydro Flora Series. See my note graph from day one.

May, 13th
12:35 PM - Water Change
- Cal Mag 40ml - 400 EC
- Micro 80ml - 600 EC
- Gro 80ml - 500 EC
- Bloom 40ml - 500 EC
- Floralicious 10ml - N/A
- Nectar 40ml - N/A
01:28 PM

Thats my nute schedule. For today.

--------
2 weeks ago this is what i used

May, 2nd
01:17 PM - Cal Mag 40ml - 400 EC
01:18 PM - Micro 20ml - 200 EC
02:00 PM - Gro 40ml - 220 EC
02:25 PM - Bloom 20ml - 120 EC
02:54 PM - Floralicious 10ml - N/A
02:56 PM - Nectar 20ml - N/A
Water Change

Using three 8gallon square buckets. They are only about half way full so about 12 Gallons of water.

firsttimeARE · May 13, 2016

What kind of software do you use and hardware? I saw a bluelab peridoser for pH and a hanna multi-doser, but wasn't hooked up in your journal.

Was thinking of making my own with some 20ml/min peristaltic pumps a BNC pH and EC probes, and an arduino with raspberry pi and BNC cards. Not sure how to do the programming though. Its open source so im sure I could learn easily enough.

Assuming it is us/cm thats 2.0EC ms/cm

No wonder you have nutrient burn. Get that shit down to 1.2-1.5EC

firsttimeARE · May 13, 2016

These beasts are only getting 1.6EC

Chumpkilla · May 13, 2016

firsttimeARE said:
What kind of software do you use and hardware? I saw a bluelab peridoser for pH and a hanna multi-doser, but wasn't hooked up in your journal.

Was thinking of making my own with some 20ml/min peristaltic pumps a BNC pH and EC probes, and an arduino with raspberry pi and BNC cards. Not sure how to do the programming though. Its open source so im sure I could learn easily enough.

Assuming it is us/cm thats 2.0EC ms/cm

No wonder you have nutrient burn. Get that shit down to 1.2-1.5EC

The PH auto-doser from blue labs has been phenomenal! I love it, but I just starting using growtronix software/hardware and its changed my experience completely. I can literally watch my plants feed now.... so now I'm hooked and I have been slowly replacing all of my controlling equipment to GrowTronix. (Saturn 5 Controller, Light Controller, etc.) The last three things to get are the PH probe ($199) with the auto-doser ($199), and the Co2 probe ($349). Once I get this everything will be logged and I can really start learning what the plants respond to.

I'll have to lower the nutes on your recommendation, I always hear different shit from everyone on the nute schedules. Some say with DWCUC you should only use half of the recommended dosage, then you hear the opposite.

Thanks for the advise. Let me know if you have any questions about the www.Growtronix.com setup.

Chumpkilla · May 13, 2016

firsttimeARE said:
These beasts are only getting 1.6EC
View attachment 3681091

Those are looking big.
How long so far? total of 90 days?
Did you start from seed?

Chumpkilla · May 13, 2016

firsttimeARE said:
What kind of software do you use and hardware? I saw a bluelab peridoser for pH and a hanna multi-doser, but wasn't hooked up in your journal.

Was thinking of making my own with some 20ml/min peristaltic pumps a BNC pH and EC probes, and an arduino with raspberry pi and BNC cards. Not sure how to do the programming though. Its open source so im sure I could learn easily enough.

Assuming it is us/cm thats 2.0EC ms/cm

No wonder you have nutrient burn. Get that shit down to 1.2-1.5EC

I literally was going to do the same thing as you, I bought the Pi starting the programming and said F that. Thats when I hit google and found growtronix..... its exactly what I was looking for and its done, with software. So I started selling shit on eBay and boom got enough for most of it.
Temp
Humid
6 control able outlets (also gives you up to date on how much each piece of equipment is costing you to run.....yea bad ass)
TDS Meter
Water Temp Meter
Camera

firsttimeARE · May 14, 2016

Chumpkilla said:
Those are looking big.
How long so far? total of 90 days?
Did you start from seed?

I started those late February. So yeah bout 90 days from seed.

DWCUC Currently 32 Days

Chumpkilla

Active Member

Chumpkilla

Active Member

firsttimeARE

Well-Known Member

Chumpkilla

Active Member

Anon Emaus

Well-Known Member

firsttimeARE

Well-Known Member

Chumpkilla

Active Member

firsttimeARE

Well-Known Member

firsttimeARE

Well-Known Member

Chumpkilla

Active Member

Chumpkilla

Active Member

Chumpkilla

Active Member

firsttimeARE

Well-Known Member

Similar threads