CreepyStevie69
Well-Known Member
Welcome!
History: A while back during the Phenazepam craze I laid some on those red and white mint candies for easy storage and dosing. I believe I used MEK as the solvent. It's been (can't believe I'm about to say this, as it seems like yesterday) about 5 years or so, so please forgive me if some of this history is wrong/inaccurate. Anyway, I laid them in 2 mg and 5 mg, I think.
I was going to try the same process with Etizolam 99.5%+ pure powder, with some slight differences, tomorrow. The following is the recipe I was mulling around my head. Any tweaks/suggestions/comments are appreciated and welcomed.
Materials*:
- Etizolam
- Scale
- Ethanol bought from local drug store. Strongest available. I'm choosing this due to availability, ease, cost, and accessibility.
- mL measuring spoons/glass/device
- 1-3cc Syringe
- Desired material to lay final solution
*The above materials are open for discussion to add and/or replace, except Etizolam, however I'm sure this can be used with other benzo/benzo-like materials. Well now that I think about it this same method can be used to lay just about anything small enough if you know how to adjust accordingly.
Procedure:
1. Measure out desired weight of Etizolam. For the sake of this thread weigh out 100 mg. The most accurate scale I have is .01g, of course .001g would be ideal.
2. Next, measure out 50 mL of Ethanol. I've read through other resources/others' experience that Etizolam can be mixed into a 2mg/mL solution. Thus, only needing half the amount of solvent than powder.
3. Pour 100 mg powder into 50 mL Ethanol, stir/shake/mix.
4. Using a syringe suck up 1 mL/cc of solution
5. Squirt solution onto desired dosing material, i.e. candies, blotter, or something rolling around in my head is thick absorbent paper towel squares.
6. Leave to dry/evaporate flat
7. Once the material is dry all that should be left is the Etizolam. If using the paper towel method one can then place the paper towel squares in gel caps.
This is should be enough for 50 2 mg doses.
Again, any thoughts would be greatly appreciated. This was just written off the top of my head as a running idea. So, if something needs a second look, tweaking, or if more powder can be mixed into solution leave a reply and let's talk about it. Enjoy. I hope this was informative.
-CS69
History: A while back during the Phenazepam craze I laid some on those red and white mint candies for easy storage and dosing. I believe I used MEK as the solvent. It's been (can't believe I'm about to say this, as it seems like yesterday) about 5 years or so, so please forgive me if some of this history is wrong/inaccurate. Anyway, I laid them in 2 mg and 5 mg, I think.
I was going to try the same process with Etizolam 99.5%+ pure powder, with some slight differences, tomorrow. The following is the recipe I was mulling around my head. Any tweaks/suggestions/comments are appreciated and welcomed.
Materials*:
- Etizolam
- Scale
- Ethanol bought from local drug store. Strongest available. I'm choosing this due to availability, ease, cost, and accessibility.
- mL measuring spoons/glass/device
- 1-3cc Syringe
- Desired material to lay final solution
*The above materials are open for discussion to add and/or replace, except Etizolam, however I'm sure this can be used with other benzo/benzo-like materials. Well now that I think about it this same method can be used to lay just about anything small enough if you know how to adjust accordingly.
Procedure:
1. Measure out desired weight of Etizolam. For the sake of this thread weigh out 100 mg. The most accurate scale I have is .01g, of course .001g would be ideal.
2. Next, measure out 50 mL of Ethanol. I've read through other resources/others' experience that Etizolam can be mixed into a 2mg/mL solution. Thus, only needing half the amount of solvent than powder.
3. Pour 100 mg powder into 50 mL Ethanol, stir/shake/mix.
4. Using a syringe suck up 1 mL/cc of solution
5. Squirt solution onto desired dosing material, i.e. candies, blotter, or something rolling around in my head is thick absorbent paper towel squares.
6. Leave to dry/evaporate flat
7. Once the material is dry all that should be left is the Etizolam. If using the paper towel method one can then place the paper towel squares in gel caps.
This is should be enough for 50 2 mg doses.
Again, any thoughts would be greatly appreciated. This was just written off the top of my head as a running idea. So, if something needs a second look, tweaking, or if more powder can be mixed into solution leave a reply and let's talk about it. Enjoy. I hope this was informative.
-CS69
