DIY OSRAM OSLON SSL led panel
MeGaKiLlErMaN
Well-Known Member
Most people here are on the Cree and vero vibe around here. Not many like the blurple and know that it's not as good as white light. It does grow but it's not very efficient. That's the main reason.
I suggest checking out the Cree CXB 3590 and the Veros. Not to mention citi led... Look around the LED area and you will learn pretty quick. Check out Growmau5 on YouTube, that's where I started.
I suggest checking out the Cree CXB 3590 and the Veros. Not to mention citi led... Look around the LED area and you will learn pretty quick. Check out Growmau5 on YouTube, that's where I started.
HighOnDIYLife
Active Member
I fully agree with MegaKillerman
Levradus
Well-Known Member
well if u are in good condition with the re-soldering those cables and know the relation with the drivers current and voltage of your led's then you can make magic
MeGaKiLlErMaN
Well-Known Member
Yes Growmau5 does a video on it
cindysid
Well-Known Member
Thanks, I will try to find it!
BM9AGS
Well-Known Member
You can order these: http://timbergrowlights.com/100-wat...-kit-meanwell-hlg-power-supply-free-shipping/
He can get every color
He can get every color
MeGaKiLlErMaN
Well-Known Member
What's your budget? No matter how low there's a better option with cons... That might mean driving them harder but even so you're going to be more efficient than a Gaveda which is something in the high 30%s.
MeGaKiLlErMaN
Well-Known Member
Like for a 4x4? Is it for veg or flower, or both?
Levradus
Well-Known Member
not 4x4 just one plant or two max
yes both
well right now Im thinking to do
4 x LC040B ( they will be parallels on a heatsink 60cm-16cm-2.5cm x 2 pieces )
on the corners cobs will be and among those cobs I will add reds and blues 15-30 pieces max or equal to drivers capability to fill up its potency after 4 cob power draw I will add reds anb blues to fill the power of driver.
what do you think guys ?
yes both
well right now Im thinking to do
4 x LC040B ( they will be parallels on a heatsink 60cm-16cm-2.5cm x 2 pieces )
on the corners cobs will be and among those cobs I will add reds and blues 15-30 pieces max or equal to drivers capability to fill up its potency after 4 cob power draw I will add reds anb blues to fill the power of driver.
what do you think guys ?
MeGaKiLlErMaN
Well-Known Member
2 of these
http://www.rapidled.com/bridgelux-vero-29-cob-array/
One of these
http://www.rapidled.com/mean-well-hlg-240h-c2100b/
That's about 140-120$ and all you need from there is an active heatsink. And there's a calculator on here..
That setup should get you the most power for price point pushing around 250w
I think that a 5.88 profile would work with maybe 2 CPU fans. Not sure on the length of the heatsink
http://www.rapidled.com/bridgelux-vero-29-cob-array/
One of these
http://www.rapidled.com/mean-well-hlg-240h-c2100b/
That's about 140-120$ and all you need from there is an active heatsink. And there's a calculator on here..
That setup should get you the most power for price point pushing around 250w
I think that a 5.88 profile would work with maybe 2 CPU fans. Not sure on the length of the heatsink
BOBBY_G
Well-Known Member
No, the main reason is that this forum is full of bandwagoners.
blurple can produce excellent results and be efficient as well.
SilvioBerlusconi
Active Member
The problem with monos is the PARW/$ ratio ....
BM9AGS
Well-Known Member
VenomGrower6990
Well-Known Member
MeGaKiLlErMaN
Well-Known Member
Well that's at center, I would like to see what it's PPFD is throughout. Of course it puts out good results, but only in the range provided. Watt to watt I would like to see an LED on LED comparison to see if the full range beats out the monos on a watt to watt comparison.
