DIY-LED Builder what are your results?

1) What COB are you using?

2) How many COB are you using?

3) What Driver are you using?

4) What Heatsinks are you using?

5) How many watts are you getting?

6) What are the amps draw from the wall outlet?

7) If You have pictures of the lamp you have built, can you please post them?


I would like to thanks all the person that has contributed posting Led DIY guide,
personally I would like to thanks SupraSPL as his DiY LED - Cree CXA3070 is the one that inspired me to read about the Led DIY.

Thanks In Advance.

I just built a light with 2 cob full spectrum 380- 780nm 50 w bridgelux no reflectors (for my flower cabinet)
mounted to cheap cpu heatsinks w\fans still working out how to hang it
I have been burning them in in my veg box with great results (i'll probably build a couple more)
awesome growth nice and green
I need to take some pics I'll try to post some later
mmmmpink

Thanks mmmmbrownies, I really apreciate it ,I hope others members can also comments as it can be used as a quick references for all of us.

Hey, augusto, I just made a lamp, so here you go:

1. 10 x cxa1304 (3 are missing on the pics)
3 x red LedEngin 10w LEDs
3 x deep red LedEngin 10w LEDs
2 x blue LedEngin 10w LEDs

3. 2 x Meanwell 35-700 APC
2 x Meanwell 35-700 LPC

4. Aluminum slab 65cm x 38cm x 0.8cm
9 small fans w/ pre-mounted heatsinks

5. The theoretical power consumption is ~130W total
~125W leds
4.5W fans

6. Not measured

7.

And by the way, there should definitely be a sticky thread of this kind! (If not this thread itself, I don't know how this works.) To see the final builds is extremely helpful to in order to know what all the DIY talk actually ends up as.