Different boards same driver

I got alot of 132qb boards sitting around that I'm not using. 4 of them are V1 36v 2700k and another 4 of them are V2 36v 4000k. I also have a spare HLG-240H-C1750A. Can I run 2 of the V1 and 2 of the V2 boards off this driver at same time?

booms111 said:

I got alot of 132qb boards sitting around that I'm not using. 4 of them are V1 36v 2700k and another 4 of them are V2 36v 4000k. I also have a spare HLG-240H-C1750A. Can I run 2 of the V1 and 2 of the V2 boards off this driver at same time?

Click to expand...

Absolutely.it's parallel wiring you wanna be careful about different voltage diodes, Different product runs, and etc.

Airwalker16 said:

Absolutely.it's parallel wiring you wanna be careful about different voltage diodes, Different product runs, and etc.

Click to expand...

Only thing is the 132's will be at 75w that way. I'd run 6 boards. 2 PARALLEL circuits of 3 boards in series. Then each board gets 36-38w.
If not, at least run 3 boards in series. That drivers made to run 3 36V boards.

Oh damn! JUST REALIZED you said you gotta 1750. Use all 8 boards. 2 parallel runs of 4 in series. Each board gets 31-33watts.

Airwalker16 said:

Oh damn! JUST REALIZED you said you gotta 1750. Use all 8 boards. 2 parallel runs of 4 in series. Each board gets 31-33watts.

Click to expand...

I actually have the driver running one 132 board right now turned down to 50 watts at wall in my quarantine area for clones i received but there about done. I want to replace 3 120 boards i have in a 2x4 genetic test tent with two 132 2700k boards and two 132 4000k boards at about 240watts for alittle better spread. Ive ran the four V2 boards with the driver before at 280watts but wasnt sure about mixing the V1 with the V2 boards on same driver.