Deep waterculture recirculating system

hey guys just about to start my new system wanna keep a log. so here we go

[video=youtube;yGaYsCEz8pQ]http://www.youtube.com/watch?v=yGaYsCEz8pQ&context=C3b0427aADOEgsToPDskI4 x09OQ20p6WrqGAqkNgIp[/video]

post as IMG code...

there we go video fixed sry guys,

i have 4 weeks left on my current grow. i will be starting this system then and will be keeping a weekly log, on this fourm so we can all see results

here are some pics of my current grow, Using general organics ,soil used 707, soft pots,1000watt hps. 12 plants
they are in bloom have 4 weeks to go they are 3ft tall each except for cpl 3 1/2 ft tall ones . when they are done then the new system

Strains: Sour desile Blackberry kush and Ak-47

hey guys

having some problems with my back buckets farthest from my reservoir not getting as full as my other bckets. any ideas?

try slowing down the flow from the recirculating pump with a shutoff valve partially closed, or smaller pump. same problem I ran into with current setup but only 6 buckets (using shutoff valve 1/4 way closed)

hey it worked out i did that this morning. lol i also put the buckets closest to the resovoir. 3 inches higher then the the back buckets. plus i closed my valve a good amount to slow the flow.
everything working so far. ill keep everyone posted.
i will be doing a complete log on this system and grow of kryptonight

You are going to want to center those stones in the middle of the bucket and your water level looks a little high in the video.
But that is a nice looking system. Just get her dialed in, ive had a tough time with my DWC mostly due to slime, but still its been a bitch.

Awesome set-up man, +Rep'd

Do you use BH valves to daisy chain those buckets or just drill a hole and force the tubing in? Just always wondered...

I will take close up shots on how i connected the hoses. I drilled a hole with a 1" inch drill bit.
1" drill bit for bucket holes,

Grommet size: 1"inch
Hose size: 3/4" inch
Straight Size 3/4" inch

Silicone around the grommets edges that are on the outside of the bucket.
Also if yo do have a leak when system is full. Home depot sells awesome under water apoxe seal almost instantly.

[video=youtube;cQJLFmOAMac]http://www.youtube.com/watch?v=cQJLFmOAMac&context=C4ba659fADvjVQa1PpcFMu 40DgAyURlt-j2m997_N_6co7JdfrySc=[/video]

[video=youtube;SN57OHJW7xc]http://www.youtube.com/watch?v=SN57OHJW7xc&feature=youtu.be[/video]

almost forgot to record my res.

You using 3% h202? heard it had stabilizers in it that causes plant problems. Might wanna look into that.

looking into it not sure if i should get the 35% and then dilute it to 3% food grade H2O2 insted. i am currently using the 3% peroxide

everyone uses 50% grade at 1ml/gal. it doesnt have harmful stabilizers



edit: i just cant find it locally

[video=youtube;-gGaUQiJlv0]http://www.youtube.com/watch?v=-gGaUQiJlv0[/video]

hey guys got some roots out the sides and bottom on all my baskets. growing quick

nice man. Also on a side note i found 29% h202 food grade(no stabilizers) at walmart in the cosmetics section.

How much do u use per gal? Of 29-35%?

Southtexasman87 said:

How much do u use per gal? Of 29-35%?

Click to expand...

1ml/gal 50% h202 i know that for a fact. So ill use 1.5ml of 29% per gal every 3-4 days after the h202 is fully oxidized(sp)